### Type SHD-PCG (Longwall) Mining Power Cable EPR/CPE Rubber 2kV

**Product Description:**

The Type SHD-PCG (Longwall) Mining Power Cable is engineered to deliver reliable and efficient performance in harsh mining environments.

Rated for 2000 volts and suitable for temperatures up to 90˚C, this cable is specifically designed for longwall mining equipment where monitor and control conductors are required.

**Product Construction:**

- **Conductor:**

- Sizes: 1/0 AWG through 4/0 AWG

- Material: Coated annealed copper

- Stranding: Bunched wires, rope-lay-stranded per ASTM B172

- **Insulation:**

- Material: Ethylene Propylene Rubber (EPR)

- **Insulation Shield:**

- Construction: Flexible coated copper/textile braid shield applied over a non-conducting overlapped tape

- **Monitor and/or Control Conductors:**

- Material: Copper, rope-lay-stranded per ASTM B172

- Insulation: Ethylene Propylene Rubber (EPR)

- Additional: Extruded jacket over the control conductor(s)

- **Grounding Conductor:**

- Material: Coated copper, rope-lay-stranded per ASTM B172

- Position: Located in the center of the assembly

- **Jacket:**

- Material: Reinforced, two-layer, extra-heavy-duty, lead-cured Chlorinated Polyethylene (CPE)

- Marking: FeiChun™ 3/C TYPE SHD-PCG 2000 VOLTS (-50˚C)

**Options:**

- Colored jackets

- TPU (thermoplastic Polyurethane) jacket

- FeiChun™ jacket

- Other materials available upon request

**Applications:**

- Designed for use on longwall mining equipment:

- Where monitor and/or control conductors are needed or desired

- Where induced voltages in grounding systems will not produce a hazard

- On low- and medium-voltage AC circuits where shielding is desired or required

**Features:**

- Improved conductor design and new stranding process for increased flexibility and extended flex life

- Excellent resistance to heat, moisture, steam, oil, chemicals, and radiation
- Flexible for easy handling

- Resists cutting, impact, abrasion, and flame

- Excellent thermal stability and physical properties over a broad temperature range

- Reinforced two-layer jacket for maximum protection from mechanical damage—the leading cause of portable cable failures

**Compliances:**

- ICEA S75-381 Portable and Power Feeder Cables for use in mines and similar applications
- Meets flame test requirements and is accepted by regulatory standards

The Type SHD-PCG Mining Power Cable is a robust and versatile solution designed to meet the demanding needs of the mining industry, ensuring operational efficiency, safety, and reliability.

Note: This is just part of the standard parameters of our products. Please contact our Engineer if you need more. And the information contained within this webpage is for guidance only and is subject to change without notice or liability. All dimensions and specifications are nominal and are subject to normal manufacturing tolerances. All pictures shown are for illustration purposes only. The actual product may vary. All the information is provided in good faith and is believed to be correct at the time of publication.