Product Name: KCD1 Series Miniature 3-Pole 6-Pin Boat-Shaped Switch (High-Current Version)

Appearance and Structural Features:

Overall Design: This is a compact KCD1 series boat-shaped switch. The body is made of black high-temperature resistant flame-retardant engineering plastic (usually PA66), making it small and suitable for equipment panels with limited space.

Panel Markings: Clear white "I", "O", "II" markings printed on a black raised plate, indicating that this is a 3-position reset or self-locking switch (depending on the internal spring mechanism, typically used for 2-speed switching or forward/reverse control).

Dimension Specifications (Based on Drawing Markings):

Panel Size: Approximately 21mm (length) x 13mm (width). This is the standard KCD1 mounting size.

Overall Height: Approximately 22mm (excluding pins).

Mounting Method: Elastic snap hooks on both sides, suitable for snap-fit installation in rectangular small holes.

Electrical Connection:

Pin Count: 6 metal pin terminals at the bottom (6 Pin), arranged in two rows of 3 each.

Wiring Method: The 6-pin design usually corresponds to a Dual-Pole Three-Throw (DP3T) function. This means it can control two circuits simultaneously (e.g., live and neutral wires, or two sets of loads).

Position 1 (I): Connects the first set of contacts.

Position 2 (O): Internally open.

Position 3 (II): Connects the second set of contacts.

Electrical Parameters (Based on Silk Screen):

6A 250V AC: Rated current of 6 amperes in a 250-volt AC environment.

10A 125V AC: Rated current up to 10 amperes in a 125-volt AC environment.

T85: Indicates that the switch's temperature resistance rating is 85 degrees Celsius.

Note: Although you mentioned "high current" in your description, with the KCD1's size, 10A is already considered a relatively high load capacity. However, it's slightly lower than the 16A/20A of the KCD4, so pay attention to power matching when using it.

Certification Marks: Clearly printed on the side with CQC (China), ENEC (European Standard Electrical Certification), CE, and other marks, indicating that the product complies with relevant safety standards.