ATEX Explosion Proof Explosion Proof Light Low Power Strip Light 20-100W
Specification:
| Power | 20W | 50W | 80W | 100W |
| LED | CREE | |||
| Material: | Die-casting Aluminum | |||
| Driver | MEANWELL | |||
| Beam angle | 120° | |||
| Anticorrosive grade | WF2 | |||
| IP Rating | IP66 | |||
Installation Instructions:
| Before installation, check voltage, power and other parameters carefully and make installation preparations arrordingly to layout circuit. |
| 1. organize firstly supporting spare parts and accessories |
| 2. do shut off power before installation |
| 3. the loading capacity of the ceilingfixed item where the lamp is installed should be the same as the lamp weight |
| 4. do power-on test to make sure the lamp can be lighted |
| 5. make sure the lamp is installed firmly, turn on the light finally |
