A single-row ball slewing bearing, composed of inner ring, outer ring, rolling elements (steel balls), and cage, featuring a high-rigidity and low-friction design. In the model, "246" corresponds to an inner diameter of 246mm, and "2A" indicates a double-row sealed or reinforced structure.

• Inner diameter: 246mm
• Outer diameter: 313mm
• Thickness: 33mm
• Suitable for compact space requirements and capable of high-load transmission.

Made of high-carbon chromium bearing steel (e.g., GCr15), subjected to quenching and tempering. Surface hardness reaches HRC58-62, with wear-resistant and impact-resistant properties. Raceway precision is above class P5, surface roughness Ra≤0.1μm, and friction coefficient ≤0.0015.

• Dynamic load rating: 2000kN (axial) + 1500kN (radial)
• Overturning moment: 3500kN·m
• Capable of withstanding severe impact loads during construction machinery operation.

• Sealing structure: Double-lip nitrile rubber seal (2RS) combined with labyrinth dustproof design, effectively blocking dust and muddy water.
• Lubrication system: Built-in lithium-based grease (NLGI Grade 2), operating temperature range -30℃~+120℃, maintenance-free during service life.

• Rotary precision: ≤0.05mm (preload assembly eliminates clearance)
• Vibration and noise: Class P5 raceway precision reduces operating noise by over 15dB
• Impact resistance: Able to withstand instantaneous impact of 3 times the rated load

• Construction machinery: Excavator travel reducers, rotary platforms of medium and small cranes
• Mining machinery: Steering axles of mining trucks, traveling wheel sets of port gantry cranes
• Special working conditions: Dust environments (IP67 protection class), extremely cold regions at -40℃ (optional low-temperature grease)

• Installation tools: Special hydraulic tooling required to avoid raceway damage from hammering
• Bolt preload: Recommended torque for M24 bolts is 450N·m (tightening in torque gradients required)
• Coaxiality: After installation, check inner/outer ring runout ≤0.08mm

• Lubrication interval: Replenish grease every 2000 hours under normal working conditions
• Seal inspection: Check seal lip wear every 500 hours
• Service life prediction: Estimate remaining life by inputting working condition data (rotational speed, load, temperature) into online tools

• Model A: Dimensions 246*313*33, load capacity up to 95% (suitable for standard working conditions)
• Model B: ZKLN246313.2RS structure, seal grade upgraded to IP69K (suitable for extremely cold/high-dust environments)

• High-speed type: Customizable to class P4 precision, maximum rotational speed increased to 120r/min
• Long-life type: Using carburized steel material, rated life extended to L10=5000 hours

• 100% inspection items: Raceway hardness, clearance, sealing performance
• Sampling inspection items: Dynamic load test (3% sampling per batch), life bench test (≥100 hours)

• Compliant with ISO 104 standard (non-standardized BA series)
• Optional certifications: CE certification (Pressure Equipment Directive), RoHS environmental certification