CFN Brand Frunk Assembly for Tesla Model S (2021+) | 1564254-00-C

Product Overview

Key Features & Benefits

1. Exact Fit for 2021+ Model S

• Mirrors the OEM frunk’s precise contours, including the inner reinforcement ribs and outer panel shape—guarantees flush alignment with the front bumper, hood, and fenders (no gaps or unevenness that disrupt aerodynamics).
• Pre-drilled holes match the factory’s latch, hinge, and sensor mounting points (e.g., frunk release sensor, emergency latch) — no drilling or modification needed, and compatible with the Model S’s electric frunk opening/closing system.

2. OEM-Grade Durability & Safety

• Material: High-strength, impact-resistant ABS plastic with a reinforced steel inner frame (same as OEM) — withstands minor front-end impacts, road debris, and temperature swings (-40°C to 80°C) without cracking or warping.
• Crash Safety Compliance: Follows Tesla’s structural design for frunks, which act as a secondary impact zone in front collisions—maintains the 2021+ Model S’s factory crash safety performance, protecting both the front-end components and passengers.

3. Restores Full Frunk Functionality

• Fixes common issues like “frunk won’t latch,” “electric release unresponsive,” or “frunk sagging” caused by damaged panels or broken inner reinforcement.
• Preserves the 2021+ Model S’s signature frunk cargo capacity (up to the OEM 7.1 cubic feet) — no reduction in storage space, ensuring you can still stow luggage, charging cables, or other gear.

Specifications

Installation Guide

1. Safety Prep: Turn off the vehicle, disconnect the 12V battery (per Tesla’s service manual), and remove the front bumper cover to access frunk mounting points.
2. Remove Old Frunk: Disconnect the electric frunk release wiring harness, then unbolt the frunk hinges and latch from the original assembly. Carefully lift off the damaged frunk.
3. Prep New Assembly: Transfer OEM components (latch, hinges, sensors) to the CFN frunk assembly—ensure wiring connectors align with the new panel’s pre-cut holes.
4. Install CFN Frunk: Align the new frunk with the front end, bolt on the hinges (torque to 8 N·m) and latch (torque to 6 N·m), then reconnect the wiring harness.
5. Test & Adjust: Reconnect the 12V battery, test the electric frunk opening/closing function, and check for flush alignment with the front bumper/hood. Adjust hinges if needed for smooth operation.

Compatibility Note

Why Choose This Frunk Assembly?

• Avoids costly dealer replacements: Restores factory-level fit and function at a fraction of OEM pricing.
• Preserves cargo utility and crash safety: Ensures the frunk works as Tesla engineered it—no compromises on storage or protection.
• Ready for customization: Unpainted finish lets you match your Model S’s body color perfectly (recommended to have a professional paint and blend for a seamless look).