Stranded 7 / 0.16 mm Copper Flat Telephone Cable 2
Core 100m Per Box
Product Parameters:
| Model | Flat Telephone cable |
| Insulation .Diameter | 0.9mmPE |
| O.D | 2.4mmx3.6mm PVC |
| Specification | 4x7/0.10mm |
| Application | Telecommunication |
| Standard | AWG or according to customer’ request |
| Conductor | OFC/TCU/CCA/TCCA/CCA |
| Rated Voltage | Low voltage |
| Jacket | Transparent PVC & Colored PVC |
| Jacket Color | White/Black/As required |
Appliacation
1. Exceeds requirements of ANSI/TIA-568-C. 2 Category 5/ Category 3 and ISO 11801 2nd Edition Class C channel standards.
2. Exceed requirements of ANSI/TIA-568-C. 2 Category 5/ Category 3 Component standards;
3. Descending length cable marking enable easy identification of remaining cable which reduces installation time and cable scrap.
4. Color Availability: Additional cable colors available.
Mechanical Characteristics
Cable under the minimum tension ≥ 400N
Conductor elongation: ≥ 15%
Jacket before Aging
Tensile strength ≥ 13.5Mpa
Elongation≥ 150%
Jacket after Aging
Tensile strength ≥ 12.5Mpa
Elongation≥ 125%
Electronic Characteristics
Impedance: 1-16MHz 100± 15(ohms).
Max. Mutual Capacitance: 6.6nF/100m
Max. Unbalanced DC resistance: 2.5%
Max. Differential phase delay: 45nF/100m
Permitted bend radius: 10 times diameter of the cable
Min. Dielectric Strength Between Conductors: 1.0kV/min
Pair-to-Ground Capacitance Unbalance: 330(Pf/100m)
Installation Resistance: >5000MΩ *KM
Dielectric strength: DC 2500V 2S
Operating temperature: -20°C~+60°C

