Ultrasonic Pulser Receiver For Non-destructive Testing
Parameters
|
Control Parameters |
Range |
Stepping |
| Transmitting Area |
Transmitting Voltage |
60V, 110V, 150V, 200V |
Chose |
| Pulse Width |
1~40(one time is approximately 28ns) |
One Time |
| Repetition Rate (Internal Trigger) |
4Hz, 8Hz, 16Hz, 20Hz, 100Hz, 500Hz, 1kHz, 2kHz |
Chose |
| Trigger Source |
Internal Trigger, External Trigger |
Chose |
| Receiving Area |
Single/ Dual crystal |
Single Crystal(1T/1R), Dual Crystal(1T/2R) |
Chose |
| Damping |
34Ω, 50Ω, 90Ω, 510Ω |
Chose |
| Gain |
-4dB~55dB |
1dB |
Technical Specifications
| Pulse Type |
Negative Peaking Pulse/Square Wave Pulse |
| Rise Time |
Generally between 4.5-8.5ns, the damping will reach 20ns when it is 510Ω |
| Fall Time |
Generally between 3.5-6.5ns |
| Pulse Width |
One time pulse width is approximately 28ns |
| Band Width |
0.5-20MHz |
| Excitation Mode |
Pulse-Echo (P-E), Penetration (T-T) |
| Repetition Frequency |
Internal Trigger: 4Hz-2kHz; External Trigger: 0-20kHz |
| External Trigger |
Rising Edge Trigger; Trigger Voltage: 3.3V |
Standard Configuration
| PR10 Main Unit |
1 |
Connecting Cable BNC - BNC |
2 |
| Data Cable USB-4 Core Half Moon |
1 |
Power Adapter |
1 |
| Communication USB Flash Disk |
1 |
Control Software (Stored in USB Flash Drive) |
1 |