1. 1) A-shaped detecting head
   It is also named horseshoe detecting head or weld detecting head and features a movable inclined magnetic head. It has one working lamp and is especially applicable for partial AC or DC flaw detection of interior/exterior angles of irregular surfaces and work pieces.
   The pole distance is 10-160mm; hoisting capacity: AC≥4kg and DC≥18kg; weight: 2kg.
   This kind of detecting head is adopted by the Horseshoe Magnetic Yoke Tester or Angle Weld Tester. It features a wide scope of application with the movable detecting head.
2. 2) D-shaped detecting head
   It is also called electromagnetic yoke probe with various turning joints and great magnetization strength.
   It can be used for AC or DC flaw detection of plane and curved surface work pieces.
   Polar distance:25-230mm; hoisting capacity: AC≥4kg,DC≥18kg; weight:2kg.
3. 3) O-shaped detecting head
   It is also called ring detecting head with an internal diameter of 150mm and center field ≥180Oe.Weight:3kg.
   It is designed on the principle of forming a strong magnetic field by energizing a coil and is suitable for sectional fault detection or demagnetization of complicated work pieces including axles, bars, pipes and vanes.
4. 4) E-shaped detecting head
   It is also called cross magnetic yoke probe or rotating-field probe.
   Different from D-shaped and A-shaped detecting head, it can conduct omnibearing magnetization flaw detection at a time. The equipped working lamp ensures users to work with enough light; the equipped roller ensures easy operation and high working efficiency.
   Polar distance: 80mm, hoisting capacity: AC≥10kg and weight:3.5kg.

CDX-II Magnetic Particle Flaw Detector, Magnetic Yoke Tester, Portable MT Detector, A/D/O/E Probe Magnetic Flaw Detector, Horseshoe Magnetic Yoke, Rotating Field Magnetic Flaw Detector, NDT Magnetic Particle Testing Equipment, AC DC Magnetic Flaw Detector, Cross Magnetic Yoke Probe, Ring Type Magnetizing Coil