Digital X-ray Flaw Machine with DR Digital Radiographic Detector
| Model |
DR-320 |
| Transducer |
|
| scintillator |
Directly grown Csl: TI or GOS |
| pixel size |
120μm |
| A/D conversion |
16bits |
| Radiation tolerance |
≥100K Rad |
| Effective area |
246mm×307mm |
| pixel matrix |
Full Resolution Mode: 2048×2560 |
| exposure control |
AED, manual sync, soft sync |
| Communication Interface |
Gigabit Ethernet
WiFi802.11a/b/g/n 2.4/5G
300Mbps |
| temperature range |
Work: -20℃ to 50℃ |
| |
storage: -20℃ to 55℃ |
| Humidity range |
Work: 30% to 75%RH |
| |
Storage: 10% to 90%RH |
| Dimensions |
339mm×287mm×18.8mm |
| Weight |
~2.3kg |
| Shell material |
aluminum |
| Sensor Protection Material |
carbon fiber board |
| Inner shielding material |
Tungsten |
Software Requirements
- The interface information such as all in English operation windows, menus, prompts and so on.
- Dynamic real-time display of images, single frame acquisition function.
- 0-255 image integral noise reduction acquisition.
- Dynamic and static image grayscale average function.
- The moving and static images can be deflected left and right, up and down.
- Positive and negative film conversion of moving and still images.
- Image dynamic and static stepless zoom, move and reset functions.
- Brightness, contrast adjustment function.
- Image enhancement, sharpening and other processing functions.
- Display and compare multiple moving and still images on the same screen.
- Single or multiple simultaneous processing of images on the same screen.
- Point, line, angle and other geometric measurement and defect marking functions.
- It can be directly saved as HIS, BMP two-dimensional (8-bit, 16-bit) image format DICONDE, and supports saving as GIF, IFF, JPG, TIFF and other image formats.
- Image management, editing and image copy output (disc burning, print output, etc.).