| Electric Parameter | | | | | | | ||||||
| PCM Specifications For 3.7V(1S)Li-ion Battery Packs | | | | | | | ||||||
| Model:JW-B1S10A-359 | | | | | | | ||||||
| NO. | Project | | Min. | Typ. | Max. | Unit | ||||||
| 1 | voltage | Charging voltage | | 4.2 | | V | ||||||
| | | Balance voltage for single cell | / | / | / | V | ||||||
| 2 | Current | Balance current for single cell | | | / | mA | ||||||
| | | Current consumption | | | 15 | uA | ||||||
| | | Maximal continuous charging current | | | 10 | A | ||||||
| | | Maximal continuous discharging current | | | 10 | A | ||||||
| 3 | Over charge protection | Overcharge detection voltage for single cell | 4.300 | 4.325 | 4.350 | A | ||||||
| | | Overcharge detection delay time | 0.7 | | 1.3 | S | ||||||
| | | Overcharge release voltage for single cell | 4.00 | 4.05 | 4.10 | V | ||||||
| 4 | Over discharge protection | Overdischarge detection voltage for single cell | 3.438 | 3.50 | 3.562 | V | ||||||
| | | Overdischarge detection delay time | 14 | | 26 | mS | ||||||
| | | Overdischarge release voltage for single cell | 3.4 | 3.5 | 3.6 | V | ||||||
| 5 | Overcurrent protection | Over current detection voltage | 0.18 | 0.2 | 0.22 | V | ||||||
| | | Over current detection current | 17 | 20 | 23 | A | ||||||
| | | Detection delay time | 8 | | 16 | mS | ||||||
| | | Release condition | Cut load | | | | ||||||
| 6 | Short protection | Detection condition | Exterior short circuit | | | | ||||||
| | | Detection delay time | 200 | | 500 | μS | ||||||
| | | Release condition | Cut load | | | | ||||||
| 7 | Resistance | Protection circuitry (MOSFET) | | | 50 | mΩ | ||||||
| 8 | Temperature | Operating Temperature Range | -40 | | 85 | ℃ | ||||||
| | | Storage Temperature Range | -40 | | 125 | ℃ | ||||||





