Curved Intraluminal Stapler Surgical Instruments laparoscopic Circular Stapling

Function and Application
Circular Stapler HC can easily and conveniently anastomose lumen organs by firing into the tissues of alimentary canal two staggered (interior and exterior) rings of titanium staples and cutting off inside tissue with the circular blades simultaneously.
This stapler is suitably used for end-to-end and end-to-side tissue anastomoses in alimentary canal organs such as esophagus, stomach , entera etc., especially at the low recta and high esophagus not suitable for hand work. It also can be used in the circular cutting operation of hemorrhoids.

How to use Single Use Surgical Circular Stapler For Open Surgery
Single Use Surgical Circular Stapler For Open Surgery can easily and conveniently anastomose organs by firing into the tissues of alimentary canal two staggered (interior and exterior) rings of titanium staples and cutting off inside tissue with the circular blades simultaneously. The instrument is activated by squeezing the handles firmly as far as they will go. Immediately after staple formation, the knife blade resects the excess tissue, creating a circular anastomosis.
Step 1. Checking the package whether it is OK, then open it, remove the stapler
Step 2. Turning the adjusting knob counter clockwise until the anvil is completely visible
Step 3. Drawing the anvil from the pike, insert to the organ for purse
Step 4. Turning the adjusting knob clockwise until the pike deep into the stapler body
Step 5. Inserting the stapler into the organ and close the top of the stapler to the part will be anastomased. Then turn the adjusting knob counterclockwise until the pike appeared completely
Step 6. Snapping the anvil shaft into the pike until a clear click is heard
Step 7. Turning the adjusting knob counterclockwise until the indicator reaches the green district
Step 8. Opening the safety and squeezing the handle, a clear click will be heard which indicates finishing firing
Step 9. Turning the adjusting knob 3-4 circles, then extracting the stapler slowly
Step 10. Checking the anastomosed parts

Specification

Stapler Photoes