KONE Elevator Fire Board KM713150G01 LCEOPT PCB, Fire Emergency Control Interface Board For KONE 3000 Elevator, Fire Lobby Recall & Safety Interlock Module, Original Replacement Part

The fire-linked forced return-to-base station receives fire alarm signals from the fire control room, immediately cuts off normal operation logic, forces the elevator to automatically return to the first floor (fire base station), opens the doors to evacuate passengers, and then locks and disables the elevator, preventing people from being trapped or accidentally entering dangerous floors during a fire.

The fire signal acquisition and logic conversion board, serving as a dedicated fire interface board for the LCE system, collects signals such as fire alarms, forced landings, and base station elevator locking, converting them into communication commands recognizable by the mainboard, enabling one-button switching of fire modes.

The safety circuit interlocking protection cuts off external call, internal selection commands, and automatic door operators during a fire alarm, retaining only fire-specific control; it also links the safety circuit, prohibiting return-to-base station in case of abnormalities to prevent secondary accidents caused by malfunctions.

The system features real-time self-diagnosis and status feedback, monitoring fire signals and its own circuitry. In case of abnormalities, it reports fault codes to the main control board. It provides dry contacts for fire alarm/base station/elevator lock status, feeding back to the fire control room for remote monitoring.

It is compatible with multiple models and system expansions, including the KONE 3000 series (small data center/no data center), and is compatible with the LCECPU main control system. It has reserved expansion interfaces to support functions such as fire linkage, emergency power supply, and voice alarm.

Elevator PCB Board - FAQ

Q1: How do I identify the correct replacement elevator PCB board?
To identify a replacement elevator PCB board, check the original part number, hardware revision, board markings, and elevator controller model. Clear photos of both sides of the PCB can help distinguish different versions.

Q2: Can elevator PCB boards with similar part numbers be interchangeable?
Not necessarily. Elevator PCB boards with similar part numbers may differ in hardware revisions, firmware, connector layouts, or communication protocols. Compatibility must be verified against the existing elevator system.

Q3: Does a replacement elevator PCB board require programming?
Some replacement PCB boards require firmware configuration, parameter settings, or system-specific programming. Others may already contain the required software. The correct procedure depends on the PCB model and its role in the elevator control system.

Q4: Can a faulty elevator PCB board be replaced without changing the complete control system?
In some cases, an individual PCB can be replaced if the replacement is compatible with the existing controller, firmware, wiring, and connected components. A qualified technician should confirm the fault before deciding on replacement.

Q5: What information should I provide when sourcing a replacement elevator PCB board?
Please provide the original PCB part number, hardware revision, elevator model, clear board photos, and required quantity. SULAB can help review these details and check available replacement options.