CR137-BZ-T2 Heavy-Duty Limit Switch – Roller Lever, 2×SPDT Snap-Action Contacts
IP67 industrial limit switch with steel roller lever, 2-pole micro-snap contacts, side & bottom conduit entries, and positive NC opening for safety circuits.
The CR137-BZ-T2 is a rugged, safety-rated limit switch designed for position monitoring on conveyors, lifts, presses and packaging machines.
A die-cast zinc body and IP67 seal survive oil, dust and wash-down, while the steel roller lever and positive-opening NC contacts guarantee reliable signaling even under heavy over-travel.
Dual M20×1.5 conduit entries (side & bottom) give flexible wiring, and the 2 × SPDT snap-action micro-switches are rated 10 A @ 250 VAC for direct solenoid or PLC load switching.
CE, UL, CCC listed; RoHS compliant.
| Specification |
Value |
| Model |
CR137-BZ-T2 |
| Action |
Snap-action, positive-opening NC |
| Contacts |
2 × SPDT (1 NO + 1 NC each) |
| Contact rating |
10 A 250 VAC / 6 A 24 VDC |
| Operating head |
Steel roller lever, Ø19 mm |
| Lever length |
33 mm (adjustable 360°) |
| Pre-travel |
≤15° |
| Over-travel |
≥30° |
| Differential |
≤5° |
| Operating force |
≤0.25 Nm |
| Mechanical life |
≥15 million cycles |
| Electrical life |
≥5 million cycles (AC-15) |
| Enclosure rating |
IP67 (IEC 60529) |
| Body material |
Die-cast zinc, epoxy-coated |
| Ambient temp. |
–25 °C … +80 °C |
| Cable entries |
2 × M20×1.5 (side & bottom) |
| Wire size |
0.5 … 2.5 mm² |
| Mounting |
2 × Ø5.2 mm holes, 20 mm centres |
| Weight |
≈240 g |
| Certifications |
CE, UL (E344091), CCC, RoHS |
-
Maintenance-free snap-action micro-switches – no calibration needed
-
Positive-opening NC contacts meet ISO 14119 for safety circuits
-
Dual conduit entries reduce wiring time by 30 %
-
IP67 body passes 96 h salt-spray test – ideal for food & beverage plants
-
Same footprint as European “Z” style limit switches – drop-in replacement