PRODUCT DESCRIPTION
The AD623 is an integrated, single- or dual-supply instrumentation amplifier that delivers rail-to-rail output swing using supply voltages from 2.7 V to 12 V.
The AD623 offers user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard pinout configuration. With no external resistor, the AD623 is configured for unity gain (G = 1), and with an external resistor, the AD623 can be programmed for gains of up to 1000.
The accuracy of the AD623 is the result of increasing ac common-mode rejection ratio (CMRR) coincident with increasing gain. Line noise harmonics are rejected due to constant CMRR up to 200 Hz.
The AD623 has a wide input common-mode range and amplifies signals with commonmode voltages as low as 150 mV below ground. The AD623 maintains optimal performance with dual and single polarity power supplies
PRODUCT PROPERTIES
|   			 Product Status   			 |   			  			 Active   			 |   		
|   			 Amplifier Type   			 |   			  			 Instrumentation   			 |   		
|   			 Number of Circuits   			 |   			  			 1   			 |   		
|   			 Output Type   			 |   			  			 Rail-to-Rail   			 |   		
|   			 Slew Rate   			 |   			  			 0.3V/µs   			 |   		
|   			 -3db Bandwidth   			 |   			  			 800 kHz   			 |   		
|   			 Current - Input Bias   			 |   			  			 17 nA   			 |   		
|   			 Voltage - Input Offset   			 |   			  			 25 µV   			 |   		
|   			 Current - Supply   			 |   			  			 375µA   			 |   		
|   			 Voltage - Supply Span (Min)   			 |   			  			 2.7 V   			 |   		
|   			 Voltage - Supply Span (Max)   			 |   			  			 12 V   			 |   		
|   			 Operating Temperature   			 |   			  			 -40°C ~ 85°C   			 |   		
|   			 Mounting Type   			 |   			  			 Surface Mount   			 |   		
|   			 Package / Case   			 |   			  			 8-SOIC (0.154", 3.90mm Width)   			 |   		
|   			 Supplier Device Package   			 |   			  			 8-SOIC   			 |   		
|   			 Base Product Number   			 |   			  			 AD623   			 |   		



