| Name | National Instruments 6583 Digital I/O Adapter Module for FlexRIO |
National Instruments NI-6583 Digital I/O Adapter Module for FlexRIO
The NI-6583 (Part Numbers: 781320-02, 781320-01, 199490C-01L and 199490B-02L) Digital I/O Adapter Module for FlexRIO is capable of testing computerized waveforms as huge as 200 MHz. This module has 16 LVDS channels and 32 single-finished channels. It incorporates bolster for selectable single-finished voltages from 1.2 to 3.3 Volts with 10-bit resolution and regular LVDS voltages. The NI SHC68-H1X38 link included is a single finished link that breaks out each single-finished signal into two 0.1-inch header containers, one repository, each for the signal and ground. The NI SHC68-H1X38 link gives a simple method to associate NI single-finished digital signals to different kinds of gadgets and circuits for interfacing, testing, or investigation.
The NI 6583 highlighted free single and differential channels are equipped for concurrent I/O. The single finished links and terminal squares must be utilized with the VHDCI connector, while the differential links and terminal squares must be utilized with the infini-band connector. Users can utilize a flying leads cable with the NI Separate links that should be bought for the single finished and the differential channels.
This model has 200 MHz of maximum clock rate (300 Mbit/s information rate in twofold information rate mode), 35 (32 + 3 PFI) single-finished channels with voltages in a range between 1.2-3.3V including 10 bit of resolution, 19 (16 + 3 PFI) LVDS or mLVDS bidirectional channels per-stick course control on every single channel that includes 10 ns state change time, and parallel activity of single finished and differential channels.
Number of bidirectional digital channels: 32
Duplex: -
Maximum clock rate: 200 MHz
Compatible FPGAs: Kintex-7, Virtex-5
Digital I/O termination: 50 ohm
Maximum data rate: 300 Mbits/s
Signaling type: single-ended, differential



