Power Supply Adapter with Inline on off Switch for 12V 3528 Led Light Strip(8.2ft maxlength) or 5630 5050 Led Strip Light(3.28ft Maxlength),110v AC Input to DC 12v/1000mA,12 Watt Max

feature

• Voltage: 12V DC (Converts from 110 VAC wall outlet into a 12 Volt DC plug)
• Power: 12 watt 1000mA NOT for 16.4 Feet long led strip light( Mainly designed for small DIY LED lighting products that draw any amount of power up to 12 watts;It is also suitable for some many small electrical appliances DC CCTV Cameras,IR cameras,massager,etc )
• Safety circuit protection function:short circuit,over current,over voltage,over load
• With on off switch inline the 1.2meters/3.8feet US plug cable;easy to use
• Comes with a female screw post plug(2.1x5.5mm), you may wire your led light in this connector and then plug it to the power supply
• With inline on off Switch:
  Hassle to turn off the led light by unplugging the power? Here is a inline on off switch power adapter for you. Just push the switch to turn it on or off. There is no need to plugging in or pulling out the power adapters.
  
  Compatible Application Device:
  12V led light: 12v led rigid bar,12v led light strip,12V led step light, led under cabinet light, led aquarium light, led desk lamp, led kitchen light, etc.
  Small household electronics : wireless routers, massager, Hub, DC CCTV Cameras, IR cameras, computers, audio/video Power Supply, etc.
  
  Max working length for small DIY led strip(It is NOT suitable for 5meters/16.4feet led strip light):
  - Operating 2.5metres/8.2feet(half roll) 3528 led strip light (300 LEDs per roll)
  - Operating 1.25 metre/4.1feet 3528 led strip light (600 LEDs/Roll)
  - Operating 1.5 metre/5.0 feet 5050/5630 led strip light(150 LEDs/Roll)
  - Operating one meter/3.2 feet 5050/5630 led strip light (300 LEDs/Roll)
  For 5meters/16.4feet long led strip light, please search : B0180ASJF4
  
  Attention: Max Wattage:12 watts
  -If your device power is over 12watts, the power adapter will run hot and burn out. To let the power adapter run smoothly, please make sure that the application device power is no more than 12 watts