Intelligent Shaft Displacement Monitoring Device Monitor Shaft Axial Displacement Of Hydraulic Generator Operat
   
  Overview
  
 Intelligent shaft displacement monitor spindle axial displacement monitoring instrument of a unit structure. Monitor with microcontroller as the core processor, the eddy current displacement sensor configuration, non-contact preamplifier, monitor the shaft axial displacement of hydraulic generator operation process.
   
  Technical parameters
  
 - input signal: a signal of eddy current sensor;
 In the measuring range: 0 ~ 20.00mm (or user);
 - measurement accuracy: + 0.01mm;
 - sensitivity: 5V/mm (or 2.5V/mm);
 - frequency response: 0.5Hz ~ 250Hz;
 - display: 8 digital tube display;
 - supply sensor: DC + 12V;
 - analog signal output: DC4 ~ 20mA (load resistance is less than or equal to 525V);
 - output alarm signal: contact form: normally open contact capacity: AC220V 5A/ DC24V 5A
 - alarm settings: two alarm output (range arbitrarily set);
 - instrument power supply; AC220V + 10% 50Hz;
 - Power: 10W;
 In the use of the environment: temperature 0 ~ 45 relative humidity is less than or equal to 90% DE
   
   
    
   
   