4WRZ Series Electro Hydraulic Servo Valve
Product Overview
High-performance electro hydraulic servo valve from Rexroth, Germany. Designed for precise flow control in industrial hydraulic systems.
Available Models
- 4WRZ10W9-50-70/6EG24N9K4/M
- 4WRZ10W9-25-70/6EG24N9EK4/M
- 4WRZ10W9-25-70/6EG24N9K4/D3M
- 4WRZ10W9-25-70/6EG24N9K4/M
- 4WRZ10W8-85-70/6EG24N9EK4/M
Technical Specifiions
| Attribute |
Value |
| Brand |
REXROTH |
| Type |
Proportional directional valve |
| Material |
Cast steel |
| Scope of Appliion |
Hydraulic system |
| Applicable Medium |
Oil products |
| Nominal Pressure |
Normal pressure (MPa) |
| Nominal Diameter |
6-way diameter (mm) |
| Installation Type |
Threaded installation |
| Operating Temperature |
Room temperature |
| Type (channel loion) |
Straight through type |
Product Image
Frequently Asked Questions
What are the key features of the 4WRA6 valve?
- Direct-operated design for precise flow control without external feedback
- Proportional solenoid control with detachable coils and centering thread for easy maintenance
- Spring-centered spool that returns to neutral when de-energized
- Compatibility with external electronics (e.g., Eurocard amplifiers) for signal control
- Compact sizes: NG6 and NG10
How does the 4WRA6 valve work?
When an electrical signal is sent to the proportional solenoid, it generates a force that moves the spool proportionally. This adjusts the opening of flow paths between ports P (pressure), A/B (actuator lines), and T (tank), enabling continuous control of flow direction and volume. The spool returns to center via springs when de-energized.
Where is the 4WRA6 typically used?
This valve suits appliions requiring precise hydraulic control, such as:
- Industrial machinery (e.g., presses, plastic injection molding)
- Mobile equipment (e.g., cranes, excavators)
- Systems needing directional and flow control without integrated electronics
How do I select the right model?
Model codes indie specifiions (e.g., 4WRA6E07-2X/G24N9K4/V):
- 4WRA6: Series and size (NG6)
- E07: Spool type and control configuration
- G24N9K4: 24V DC supply, corrosion-resistant coating
Consult REXROTH datasheets or suppliers for exact requirements like flow rate, spool type, and electrical inputs.
What are critical installation notes?
- Use the specified subplate (ISO 4401) to avoid leakage
- Ensure the tank line is never unloaded; a pre-load valve (~2 bar) may be required
- Verify electrical connections (e.g., 24V DC) and coil compatibility