HP - 510 is a multifunctional digital power meter for measuring the power of single - phase (1P/2W) AC and DC power supplies. The test frequency range of this product can reach DC 0.5Hz - 100kHz. It uses a 5" IPS LCD display screen, has a 5 - digit measurement display, enables simultaneous measurement of multiple parameters, and possesses high - precision measurement capability. At the same time, it has functions such as waveform display (voltage/current/power), integral measurement function, measurement and analysis of each harmonic (measurement at 50/60Hz meets the requirements of IEC61000 - 4 - 7), external sensor input terminals, and various communication interfaces to assist users in achieving clear, convenient and accurate power measurement.
|
Model |
HP510 |
||
|
AC/DC Voltage |
600Vrms MAX |
||
|
AC/DC Current |
20Arms MAX |
||
|
Power Factor |
-1.000~1.000 |
||
|
Test Accuracy |
±(0.1% of Reading + 0.2% of Range), 0.2 Level |
||
|
Input Bandwidth |
DC, 0.5Hz~ 100KH |
||
|
Power Filter |
OFF, 500Hz, 5KHz |
||
|
Frequency Filter |
OFF, 500Hz, 5KHz |
||
|
Integration Mode |
Manual Integration Mode, Standard Integration Mode or Repeated Integration Mode. |
||
|
Integration time |
0 hours 00 minutes 00 seconds ~ 9999 hours 59 minutes 59 seconds |
||
|
Accuracy |
± (power accuracy (or current accuracy) + 0.1% reading) (fixed gear) |
||
|
Range setting |
Auto range or fixed range |
||
|
Measurement mode |
0.2 seconds/time |
||
|
Working power supply |
AC100V ~ 240V, 50Hz/60Hz |
||
|
Storage conditions |
Temperature: -40 ~ 70℃ |
||
|
Humidity |
<90%RH (no condensation) |
||
|
Operating environment |
temperature 0 ~ 40℃, relative humidity <70%RH (no condensation); For indoor use only, altitude <2000 meters. |
||
|
Dimension |
W214mm*D320.5mm*H120.5mm |
||
|
Input indicators |
|||
|
Item |
Voltage |
Current |
|
|
Input type |
Floating input via resistor divider |
Direct input or sensor input |
|
|
Input impedance |
Approx. 2MΩ |
Direct input:: Approx. 500mΩ (200mA and below range) Approx. 50mΩ (0.5A and above range) Sensor input: about 100KΩ |
|
|
Measurement range (RMS) |
15V, 30V, 60V, 150V, 300V, 600V |
Direct input: 5mA, 10mA, 20mA, 50mA, 100mA, 200mA, 0.5A, 1A, 2A, 5A, 10A, 20A Sensor input: 50mV, 100mV, 200mV, 500mV, 1V, 2V, 5V, 10V |
|
|
Maximum continuous input |
1.5kV Peak or 1kV RMS, whichever is smaller |
30A Peak or 20A RMS, whichever is smaller (200mA and below) 100A Peak or 30A RMS, whichever is smaller (0.5A and above) |
|