MachineU > China Products > Machinery > Metal & Metallurgy Machinery > Metal Coating Machinery
C60598-1 Clause 4.14.3 Bending Test Equipment For Adjusting Luminaire
C60598-1 Clause 4.14.3 Bending Test Equipment For Adjusting Luminaire
Specifications
Brand Name :
PEGO
Model Number :
PG-BDT
Certification :
Third-Lab Calibration Certificate
Place of Origin :
China
MOQ :
1 set
Price :
Negotiation
Payment Terms :
T/T, Western Union, MoneyGram
Supply Ability :
100 sets/months
Delivery Time :
15 working days
Packaging Details :
woodencase
Standard :
C60598-1 clause 4.14.3
Application :
for testing the flexible cord and cable of adjusting luminaire
Control system :
PLC+touch screen
Test driver :
servo driver
Twist angle :
125 degrees in both directions from the vertical
Warranty :
12 months
Description

Bending Test Equipment for Adjusting Luminaire Conforms to IEC60598-1 Clause 4.14.3

1. Introduction

The bending test equipment for adjusting luminaire is designed to meet the test requirement of IEC60598-1 clause 4.14.3. The flexible cord or cable of adjusting luminaire shall have no more than 50% of the strands in a conductor be broken and no serious damage to the insulation after continuously bending and torsion.

2. Parameter

Control mode PLC control+touch screen interface
Test station 1
Application Adjusting luminaire (like drawing board luminaires, shop-window spotlights, floodlighting luminaires)
Test driver Servo motor
Twist angle 0-3600 adjustable (standard requirement: 1250 in both directions from the vertical)
Test frequency 1-10 times/min
Number of trials 0-999,999 cycles presetable (a cycle of operation is a movement from one extreme of the range to the other and back to the starting position, to make sure the rate of movement can reach 600 cycles/h)
Specimen adjustment The fixture is manually clamped and adjusted up and down with AC motor, the maximum distance is 500mm
Maximum swing radius of the pendulum rod R500mm, left and right of the platform, front and rear adjustment strokes are 0-500mm
Specimen clamping method pressure plate and adjustable pressure block (three different fixtures can be distributed according to the sample base provided by the customer)
Test procedure The touch screen can display bending angle, test cycles, number of trial
Alarm device Flasher, auto stop
Dimension 1300mm*750mm*1600mm (L*W*H)
Working power 220V/50Hz
Product tags

conical mandrel bend tester

,

bending test lab report

,

bending test standard
Send your message to this supplier
Send Now

C60598-1 Clause 4.14.3 Bending Test Equipment For Adjusting Luminaire

Ask Latest Price
Product Detail
Brand Name :
PEGO
Model Number :
PG-BDT
Certification :
Third-Lab Calibration Certificate
Place of Origin :
China
MOQ :
1 set
Price :
Negotiation
Contact Supplier
C60598-1 Clause 4.14.3 Bending Test Equipment For Adjusting Luminaire

Pego Electronics (Yi Chun) Company Limited

Verified Supplier
8 Years
jiangxi, yichun
Since 2014
Business Type :
Manufacturer, Distributor/Wholesaler, Exporter, Trading Company
Main Products :
Electrical Safety Test Equipment, Environment Test Equipment, Impact Test Equipment
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Electrical Safety Test Equipment
MachineU China Products Machinery Metal & Metallurgy Machinery Metal Coating Machinery
Contact Supplier
Submit Requirement