Similar Test Probe B with 50mm Circular Stop Face IEC60335-1 Clause 20.2
1. Introduction
The probe is similar to test probe B of IEC61032 but having a circular stop face with a diameter of 50mm, instead of the non-circular face. The probe is designed to meet the test requirements of IEC60335-1 clause 20.2, it is applied to verify the mechanical strength of enclosures, guards and simliar parts.
2. Specification
| Model | PG-TPB-1 |
| Jointed point size 1 | 30±0.2 |
| Jointed point size 2 | 60±0.2 |
| Length of finger | 80±0.2 |
| Fingertip to baffle size | 180±0.2 |
| Fingertip taper fillet | S4±0.05 |
| Diameter of finger | Ф12 0 -0.05 |
| Diameter of baffle | Ф75±0.2 |
| Thickness of baffle | 5±0.5 |
| A-A section diameter | Ф50 |
| A-A section width | - |
| Thruster | 10N optional |
| Standard | IEC60335-1 |
