The KOEO EQ0.5-01YS is a wireless remote 500kg small electric chain hoist that brings cable-free operation to compact lifting applications. Featuring an industrial-grade 433 MHz wireless remote system with up to 100 meters range, a 0.75 kW IP55 enclosed motor, G80 alloy steel chain, and a remarkably compact 40 kg body, the SM-WR500 enables operators to control lifting from the safest vantage point without being tethered to the suspended load. The dual-mode control system includes both wireless remote and wired 36V pendant backup, ensuring uninterrupted operation. This hoist is ideal for small manufacturing cells, automotive workshops, and assembly stations where operator mobility and visibility significantly enhance both safety and workflow efficiency.

• Wireless Remote with 100m Range: The 433 MHz wireless transmitter provides reliable cable-free control up to 100 meters in open areas. Operators can position themselves at the optimal safety distance with clear load visibility, eliminating the trip hazards and positioning constraints of pendant cables in crowded workshop environments.
• Dual-Mode Control for Maximum Reliability: The EQ0.5-01YS includes both wireless remote and a wired 36V pendant backup. Simply swap between modes as needed. If signal interference occurs, the wired pendant ensures zero downtime without any configuration change or tools required.
• Compact 40 kg Body with 500kg Capacity: Remarkable 500 kg lifting in a body weighing just 40 kg. The compact footprint installs on workstation jib cranes, light-duty monorail systems, and modular assembly frames without requiring heavy structural reinforcement typically needed for full-size 500kg hoists.
• IP55 Enclosed 0.75 kW Motor: Dust-tight and water-jet protected motor with Class F insulation ensures reliable operation in automotive workshops, dusty manufacturing cells, and semi-outdoor covered work areas. Engineered for daily intermittent duty cycles typical of small workshop environments.
• G80 Alloy Steel Load Chain (Ø5.0 mm): Heat-treated calibrated G80 alloy steel chain with 4:1 safety factor delivers smooth, quiet lifting with excellent wear resistance. The 5.0 mm fine-pitch chain minimizes vibration during lifting for stable load handling at full capacity.
• Precision Electromagnetic DC Brake: The compact DC brake provides instant, silent load holding upon releasing the control button. Zero-creep positioning enables precise component alignment during assembly and installation tasks, critical for engine and machinery work.
• Ergonomic Wireless Transmitter: The handheld transmitter includes a lanyard loop for neck-worn operation, large glove-friendly buttons, and LED indicators for battery level and signal strength. Powered by two standard AAA batteries providing months of daily use before replacement.

The EQ0.5-01YS wireless remote small electric chain hoist is designed for automotive repair shops performing engine pulls and transmission work, small fabrication shops, motorcycle and powersports dealerships, light manufacturing assembly stations, equipment maintenance facilities, and theatrical stage rigging. The cable-free operation is particularly valuable in shops with limited floor space where pendant cables create trip hazards, and in applications requiring the operator to guide loads from below while controlling the hoist.

Each EQ0.5-01YS hoist is packed in a KOEO-branded reinforced plywood case with high-density foam padding, moisture-proof VCI wrapping, and silica gel desiccant packs. The wireless remote transmitter is separately packed in a protective foam insert. Export-grade outer carton with steel banding ensures secure transit. Every unit undergoes 100 percent factory load testing at 1.25 times rated capacity (625 kg) with wireless remote function verification. CE certified compliant with EU Machinery Directive 2006/42/EC and RED Directive 2014/53/EU. Manufactured under ISO 9001:2015 quality management systems. G80 chain certified to EN 818-7. Standard delivery within 5 to 7 working days for stock, 15 to 20 days for production orders.