Customized Power industrial explosion proof electric heater customized liquid pipeline

Product description

An pipeline heater is composed of an immersion heater covered by an anti-corrosion metallic vessel chamber. This casing is mainly used for insulation to prevent heat loss in the circulation system. Heat loss is not only inefficient in terms of energy usage but it would also cause unnecessary operation expenses. A pump unit is used to transport the inlet fluid into the circulation system. The fluid is then circulated and reheated in a closed loop circuit around the immersion heater continuously until the desired temperature is reached. The heating medium will then flow out of the outlet nozzle at a fixed flow rate determined by the temperature control mechanism.

Main features

1. During heating, air max temperature can reach 500 degree Celsius, but the surface temperature of the shelth is just around 50 degree Celsius
2. Heat efficient is more than 95%
3. The heating elements is made of high temperature alloy with good mechanical character
4. Clean, small volume
5. Customized design

Application

1. Heating of chemical materials in the chemical industry, some powder drying under certain pressure, chemical process and spray drying.

2. Hydrocarbon heating, including petroleum crude oil, heavy oil, fuel oil, heat transfer oil, lubricating oil, paraffin oil, etc.

3. Process water, superheated steam, molten salt, nitrogen (air) gas, water gas, etc., which are heated by heating.

4. Zone 1, Zone 2 hazardous gas sites;

5. Group IIA, IIB T1~T4 explosive gas or steam environment.

6. Due to the advanced explosion-proof structure, the equipment can be widely used in chemical, military, petroleum, natural gas, offshore platforms, ships, mining areas and other places where explosion protection is required.