Metal spiral wound gasket ringsmanufacturered byXinrui

Spiral wound gasketconsists of "V-shape"(or"W-shape")metal tape and nonmetal tape,which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.

Products Features of Metal spiral wound gasket rings

• Wide range of applicable working condition,high temperature and high pressure resistance,applicable to super low temperature and vacuum condition.Chemical resistant gasket is available under various medium,through change of composition of gasket.
• Strong stress compensation,stable and reliable sealing performance even under frequent pressure fluctuation condition.
• Perfect sealing performance.
• Normal requirement of flange surface finishing which contact with gasket.
• Easy installation and low pre-tightening stress of gasket.

Assortment in display ofMetal spiral wound gasket rings

Code no.	Name	Picture	Description
A	basic type		Tickness:4.5mm
B	with inner ring		1.Tickness for Inner ring:CS(3.2MM) 2. Tickness for inner ring:SS304/316/316LL(3.0MM) 3.Tickness:4.5MM
C	with outer ring		1.Tickness for outerr ring:CS(3.2MM) 2. Tickness for outer ring:SS304/316/316LL(3.0MM) 3.Tickness:4.5MM
D	with inner &outer ring		1.Tickness for outerr ring:CS(3.2MM) 2. Tickness for outer ring:SS304/316/316LL(3.0MM) 3.Tickness:4.5MM

1.A.Wound style gasket consists of four type:basic type,with inner ring,with outer ring,and with inner and outer rings. B.Heat exchanger wound style gasket:basic type and with inner and outer rings.
2. Normally matrial used:
A.Steeltape:08F,0Cr18Ni9(304),0Cr18Ni9Ti,1Cr18Ni9Ti(321),0Cr17Ni12,M02(316),00Cr17Ni14M02(316L).
B.(Cold roll)steel plate for inner and outer ring:Outer ring:mild steel,0Cr13 and 0Cr18Ni9
Inner ring:same as steel tape,special order is a available through negotiation.
C.Nonmetal tape:flexible graphite,special made asbestos,teflon and non-asbestos paper.

Technical data sheet ofMetal spiral wound gasket rings

Application ofMetal spiral wound gasket rings

• Heat treatment industry for furnace parts, fans, tube hangers, and baskets and trays to hold small parts.
• Chemical process industry to contain hot concentrated acids, ammonia, and sulfur dioxide.
• Food processing industry.
• Hot acetic and citric etc.