Double Cone Rotating Integrated Hot Water / Steam 4KW / 3300KG Vacuum Drying Equipments SZG-1500

Description:

Double-cone rotating vacuum dryer is a new drier that integrates mixing and drying in the one body

and equips with condenser and vacuum pump. Therefore the vacuum drier is formed(If the solvent

does not recover, the condenser may be not used).The dryer is advanced in design, simple in inner structure,

easy to clean, to discharge all raw material, convenient in operation, lowing the strength of labor and

improving word environment. Meanwhile raw material is rotating accompanying with the rotating of container,

the wall of container can not only save energy but also make raw material dry evenly and have good quality.

It can widely apply to dry raw materials of pharmaceutical only save energy but also make raw material

dry evenly and have good quality. It can widely apply too dry raw materials of pharmaceutical industry,

chemical industry, foodstuff industry, and dyestuff industry and so on. The equipment is in conformity

with the requirements of "GMP".

Application:

The dryer is suitable for drying and mixing powder or granule raw material of pharmaceutical industry,

foodstuff industry and chemical industry and so one. Especially it is suitable for the following raw materials

that have special requirements:

1.Thermal sensitive raw material that can not undertake high temperature;

2.Raw materials that are easy to be oxidized or to be dangerous;

3.Raw materials in which the solvent needs to recover and there is toxic gases;

4.Raw materials that have the requirement of containing rather low content of residue volatized materials;

5.Raw materials that need to mix evenly and fully.

Advantage:

　Model SZG double-cone rotating vacuum dryer has double cone rotating tank. Under the state of vacuum

inside the tank, pass steam or hot water into to jacket for heating. The energy can contact with the damp

raw material through the inner wall. The vaporized steam can be pumped out through vacuum

exhaust pipe when the damp raw material absorbed heat. Because the inner of tank is in the state of vacuum

and the raw material is turned over all the time caused by the rotating of tank, the drying speed of raw

material is quickened and drying efficiency is raised too and the purpose of uniform dry can be raised.

Specifications:

Properties and Specifications

1.pressure of work:-0.09MPa ~ -0.096MPa
inside the tank ≤0.3MPa
inside the jacket
2.medium of work
inside the tank: crystal or no adhesive power or granule raw material
inside the jacket: hot water or steam
3.temperature of jacket ≤140℃
4.coefficient of feeding: 0.2-0.5 calculated in accordance with the volume in the tank
5.speed of rotating: 3-12 r/min
Technical parameters

1. The coefficient of feeding can be increased to suit for the raw material that the volume before and safety

may be changed greatly.
2. Revolution for 2000type: 6rpm; for 3000 and 5000 type: 4rpm;
3. For special requirements, we can design and manufacture too.
4. The specification of inner tank is the same.