V series mixer is a mixing equipment for pharmaceutical industry and other powder and granular materials. It is widely used in pharmaceutical, food, chemical, and other industries. The equipment is designed based on the advantages of similar foreign products. Because the lengths of the two cylindrical columns that make up the mixer are not equal, they form an asymmetry. When the mixer is running, the materials are different from the decomposition and combination angles, forming an axial layer by layer Alternate diffusion and mixing, due to the different planes of the materials on the inner wall of the cylinder, also have different potential energy between each other, resulting in lateral convection mixing. The above-mentioned mixing effect is continuously repeated, so that the materials reach a very uniform random mixing state. Due to the internal gravity mixing, this machine has a small pressure feed to the material, high mixing uniformity, and is made of stainless steel material. The inner and outer walls are polished, and the power consumption and efficiency are high. It is an ideal device for the new generation of powder mixing.
The V type mixer adopts manual feed and closed disc valve discharge, which can avoid dust spilling; with unique mixing barrel structure, high efficiency blending and no dead angle, the materials can mix evenly. The inside and outside of the machine are polished. It is suitable for smaller powder, blocks and the material that contain a certain mixture of water. In addition, the machine is also equipped with a timing device; In that case, you can control the material mixing time.