Annual output of 100,000 tons station type dry plaster mortar production line

Description:

BH dry powder mortar (powder powder) production line equipment consists of raw material drying, raw material storage, metering, mixing, control, dust removal and finished product storage; tower-type dry-mix mortar mixing station, horizontal dry-mix mortar mixing station, station type Three series of dry-mixed mortar mixing stations; theoretical productivity of 10-20 tons per hour, can produce masonry mortar, repair mortar, waterproof mortar, overlay mortar, floor mortar, tile binder, concrete interface agent, caulking mortar , various types of mortar products such as special mortar for external wall insulation system.

Parameter:

Configuration of BH dry mortar production line :

BH dry mortar production line is used for producing dry mortar, it main consists of the following parts: material store silo, sand dryer, screw conveyor, weighing system, hoist machine, pre-mix silo, mixer, final product silo, packing machine, dust collector, air-phase balance system, control system.

The productivity is 10-20T/H as customer requirement, According to the layout type, it can be classified into tower type and series type, Its up to the customers workshop area. The needed area is 800~10000m².

Features:

The raw material silo and finished product silo are arranged around the main mixing machine. Raw material weighing system on the ground and addtive weighing system on the top of the mixer can effectively shorten the distance of material transportation, shorten the mixing time and the time of material entering the mixer as much as possible, ensure the quantity of production batches within hours, ensure the measurement accuracy of materials and the actual effective capacity of finished mortar.

Advantages of dry plaster mortar production line:

1. Wide range of use: The equipment can meet the requirements of dry mortar production. Such as: masonry mortar, plaster mortar, polymer mortar required for thermal insulation, polystyrene granule insulation mortar and other dry powder mortar.
2, the investment is small: the device has obvious value advantages. In particular, the production projects for exterior wall insulation and decorative mortar have small investment, quick effect and cost recovery in a short time. Moreover, it avoids equipment idle and resource waste caused by excessive investment.
3, the application is simple: the equipment has a small footprint, simple operation, low energy consumption, can produce about 5-40 tons per hour (no need to build a large factory, greatly reduce the initial investment), small operating space, staffing Less, easy to operate, the advantages of direct installation and use without civil construction.
4, long service life: the material of the vulnerable parts of the equipment are all high-strength wear-resistant steel. It has greatly extended its life.
5. The main machine of the dry mortar equipment adopts the double-shaft gravity-free mixing machine. The machine is developed on the basis of the technical essence of the new generation of new models. It has automatic feeding, pneumatic discharging, no block on the barrel wall. No dead ends.
6, automatic computer control, intelligent identification, passive metering, high sensitivity, stable performance, strong anti-interference ability, accurate measurement.

Installation site: