Acid Proof Mortar Product Line 3 - 5 T/H Simple Dry Mortar Machinery

Description:

This simple dry mortar plant is improved on the 1-3 T/H smal dry mortar plant. It is added storage silo, material conveying system, and automatic packing system. It used the twin shaft paddle mixer. This mixer is much better than the horizontal ribbon mixer, it saves mixing time, and has high efficient mixing capacity.

Components:

1)Feeding hopper: Material feed into the mixer from here.
2)Screw conveyor: Used for conveying the materials to the mixer, the conveyor can not heavy load starting.
3)Twin Shaft Agravic Mixer: Used for mixing materials uniformly, and the special paddle blades group can break up the fibre.
4) Finished product silo: Used for storing the finished goods material, waiting for packing.
5) Automatic weighing packaging machine: Used for packing finished product material in the finished products silo, it can automatically weighing and packaging, and accuracy can be + / - 0.5kg.
6)Control cabinet: The power switch control for this equipment of production line

Parameter:

Working principle:

The high efficiency twin shaft mixer adopts the paddle structure,The materials can lose weight instantly at the critical parabolic rotate speed so that can achieve best mixing effect,while the violent turnover speed shortens the mixing time in large extent,Thus the mixer is widely applied in medium and large dry mortar production lines.

Features:

• The linear type structure is simple
• It is easy in installation and maintation.
• It used world famous brand components in pneumatic parts ,electric parts and operation parts
• No pollution, high efficiency

Advantages:

1.It is easy to operate,2-3 people can operate ,effectively save the labor.
2.Environmental friendly:this type mixer improved the working environment,and reduced the working labor intensity.
3.It requires little investment and small occupation area but with good efficiency.greatly save capital investment.
4.This mchine is energy-saving, low noise, little pollution.Greatly reduces the production cost
5. We can provide one-stop service from design to installation according to our customers' specific requirement.

Application:

Raw material
1. Cementing material: cement, lime, plaster.
2. Aggregate: yellow sand, quartz sand, limestone, dolomite, expanded perlite etc.
3. Mineral admixture: industrial byproduct, industrial slag, fly ash, pozzolana, fine silica powder etc.
4. Water-retention and thickening material.
5. Chemical additives.
It can produce the following dry mortars:
Bonding mortar: Masonry mortar, wall and floor tile adhesive mortar, anchorage mortar etc.
Decoration mortar: Decorative plaster, inner and outer wall putty, colorful decoration mortar etc.
Protection mortar: Water-proof mortar, anti-corrosion mortar, self-leveling mortar, wear resistance mortar, thermal insulation mortar, sound insulation mortar, repair mortar, mildewproof mortar, shielding mortar etc.

Packaging photo:

Installation site: