UAV Detector With Multi-Sensor Fusion Combining Drone Jammer Device
Introduction
This integrated defense system leverages AI-driven multi-sensor fusion and adaptive jamming protocols to detect, classify, and neutralize unauthorized drones across diverse operational environments. The core detection architecture employs spatiotemporal deep learning models that fuse radar micro-Doppler signatures with RF protocol metadata (e.g., DJI OcuSync, Autel SkyLink), achieving 99.1% classification accuracy even against custom-built drones employing frequency-hopping techniques35.The jamming subsystem implements cognitive RF suppression across 70MHz–6GHz spectrum, combining protocol-aware interference (2.4GHz/5.8GHz control links) with GNSS spoofing (L1/L2/L5 bands) to disrupt navigation and command chains. A reinforcement learning controller dynamically adjusts jamming waveforms based on real-time SNR measurements and UAV evasion patterns, achieving 98.3% neutralization success rate at 4km range while maintaining aviation-compliant power levels.
Basic
Function | Description | ||
UAV detection | Detection spectrum bandwidth | 70 MHZ - 6GHZ | detection focus on the 433Mhz/ 900Mhz/2.4Ghz/5.2Ghz/5.8Ghz |
Simultaneous screening number of UAV | ≧150pcs | can be customize with 1Ghz -1.4Ghz & 5.1Ghz - 5.9Ghz FPV Bands | |
The lowest detection height | ≦0 meters | ||
Detection rate | ≧99.99 % | ||
White and Blacklist | Number of identifiable models | ≧ 400 | including DJI series drones,and it has the autonomous learning ability |
the accurate identification of target | Available | for different targets of the same position, same frequency band, same manufacturer, same type of UAV respectively. | |
in-depth analysis of UAV signal | |||
the identification of unique ID | |||
the black and whitelist to distinguish | |||
Defensive Interference | Interferable frequency bands | 900MHz, 433Mhz, 1.5ghz, 2.4ghz, 5.8ghz, 5.2Ghz |
|
other customized frequency bands | |||
Remote OAM | Unattended Mode | Automatic detection and strike |
|
A variety of OAM features | Firmware updating | used with the remote server | |
Reset, status inquiry | |||
Self-testing | |||
Parameter configuration | |||
Networking | Multi-device networking | observe the online/abnormal status of each device |
|
Remote control through mobile terminals | viewing the operating interface of the device system | ||
receiving alarm information | |||
viewing the black and whitelist | |||
turning on defense function | |||
Data security | High reliability and security | certificate management and data encryption |
|
Interface Showcase