This advanced detection system utilizes specialized receiving antennas, low-noise downconverters (LNBs), and digital signal processing units to enable comprehensive scanning and precise acquisition of target satellite signals. Through sophisticated signal feature extraction and beacon frequency identification, the system rapidly locks onto target Ku-band transmission signals and continuously tracks satellite movement, ensuring reliable signal reception.
| Abbreviation | Full Name |
|---|---|
| XL-UP | Star-link Up |
| MTBF | Mean Time Between Failures |
| LNB | Low Noise Block |
| CLI | Command Line Interface |
| Module | Specification |
|---|---|
| CPU | ARM Cortex-A53, 1.5Ghz |
| Computing Unit | FPGA RFSOC-67DR |
| RAM | 2GB DDR4 |
| ROM | 64GB eMMC |
| Screen | 3.2" LCD |
| Port | RJ45, Type-C (PD Fast Charging) |
| Power Supply | Powered by internal battery, DC5521, TYPE-C PD Supported |
| Antenna | Frequency Range: 9.84-15 GHz, Gain: 20 dB, Dimensions: 115 * 83 * 220 mm |
| LNB | Ku-band to L-band Frequency Conversion, Gain: >68 dB |
Supports parallel detection of 8-band signals;
supports antenna array scanning and detection.
Supports long-distance unobstructed satellite terminal detection over 10 km.
Supports real-time recording and playback of detected signals; once a signal is detected, the original data signals are recorded, played back and stored, with a continuous recording and playback duration of over 1 s.
3.2-inch LCD screen is equipped, supporting the control of device detection and recording/playback, and displaying detection information.
Integrated with a TTS voice broadcast chip, supporting human voice broadcast of detection results; supports wireless broadcast via Bluetooth earphone connection.