8 Channel 400W Counter Anti Drone Uav Fpv Defence System With DJI Drone Decoding
With the rapid development and popularization of drone technology, drones have shown great application potential in aerial photography, agriculture, rescue, security and other fields, but at the same time they have also brought increasingly serious safety risks. Incidents such as illegal intrusions, malicious reconnaissance, and privacy violations occur frequently, posing serious threats to national security, public safety, and personal privacy. Therefore, the development of efficient and advanced drone jamming technology has become an urgent need to maintain airspace security and ensure social stability.
The key advantages include:
- AOA Proprietary logarithmic antenna calculation method for precise FPV direction finding.
- The protocol cracking/decoding range is significantly extended, with Remote Id (Drone ID) detection distance of up to 15 kilometers.
- Utilizing proprietary SDR signal control technology to effectively allocate and transmit active white noise across targeted frequency bands.
Specs
- Detection range: In an interference-free environment, signal reception range maybe vary when different antennas are used. the range of detection can up to 10km.
- Detection spectrum bandwidth: 70 MHZ - 6GHZ, focus on the 433Mhz,868Mhz,915Mhz,2.4Ghz,5.2Ghz,5.8Ghz;
- FPV Detection:300Mhz-6.2Ghz Analog Signal of FPV Drones,range up to 1-3km
- Drones Location:For UAVs with Remote ID (China GB42590-2023, US ASTM F3411-22a, EU ASD-STAN PrEN4709-002) and Drone ID (such as DJI Mavic2, Mavic3, air3s, Matrice4, etc., some require network decryption), it can parse detailed information such as drone location and pilot location up to 3-5km.
- Identify Range: LightBridgel, LightBridge2, Ocusync 1,2,3, WIFI and WIFI variant protocols, Zigbee, Bluetooth and other customized protocal of small brand, can identify UAV brands and models;
- The trajectory: have the function for tracking flight trajectory.
- Accurate recognition: it can accurately identify UAV model and electronic fingerprints (ID),≧ 400 different uavs models and the corresponding ID (identity) can be identify at the same time.
- Detection Angle: 360 °
- Detection number of UAV : ≧150pcs
- The lowest detection height: ≤0 meters
- Detection rate: ≧99.9%
- Broadband Jamming: 800-900Mhz1.2Ghz1.5 GHz2.4 GHz5.1-5.2GHz5.8GHz
- [NOTE: The Systemcan be customize with 8-10 frequency, Ex: 433Mhz800-900 MHz; 1.2Ghz; 1.4Ghz; 1.5 GHz; 2.4 GHz; 5.1-5.2GHz; 5.8GHz]
- support at the level of effective interception Angle range in a straight line dive and turned to flight of UAV, intercept distance: 2km;
- power supply mode: 220 V±10V
- Protection grade: ≧IP65
- Working temperature: - 40 ℃ ~ + 55 ℃
Key Product Features
| Function | Descriptions |
|---|
| UAV detection | - Detection spectrum bandwidth: 70 MHZ - 6GHZ, detection focus on the 433Mhz,868Mhz,915Mhz,2.4Ghz,5.2Ghz,5.8Ghz
- FPV Detection:300Mhz-6.2Ghz Analog Signal of FPV Drones
- Simultaneous screening number of UAV: ≧150pcs
- The lowest detection height: ≤0 meters
- Detection rate: ≧99.99 %s
|
| Drones Location | - Remote ID (China GB42590-2023, US ASTM F3411-22a, EU ASD-STAN PrEN4709-002)
- Drone ID (such as DJI Mavic2, Mavic3, air3s, Matrice4, etc., some require network decryption), it can parse detailed information such as drone location and pilot location.
|
| White and Blacklist | - The System can identify ≧ 400 different model UAV including DJI series drones,and it has the autonomous learning ability.
- The System can carry on the accurate identification of target, in-depth analysis of UAV signal, the identification of unique ID, and the black and whitelist to distinguish.
- Whitelist and a blacklist can be set for different targets of the same position, same frequency band, same manufacturer, same type of UAV respectively.
|
| Defensive Interference | The System has interference capabilities of 900MHz, 433Mhz; 1.5ghz, 2.4ghz, 5.8ghz; 5.2Ghz and other customized frequency bands, and covers most of the UAV communication available in market. |
| Remote OAM | After turning on the fully self-movable defense, it can enter unattended mode, detect, and strike autonomously. And a variety of OAM features are available when used with the remote server, including firmware updating, resetting, status inquiry, self-testing, parameter configuration, and more. |
| GPS | The System can detect its current position using its built-in GPS. |
| Networking | The System can network multiple devices through the cloud server, observe the online/abnormal status of each device, and control the device remotely through the mobile terminal (mobile phone IPAD), including but not limited to viewing the operating interface of the device system, receiving alarm information, viewing the black and whitelist, and turning on defense functions. |
| Data security | Use certificate management and data encryption between the equipment and server to ensure data reliability and security. |
System Interface Display:
The intuitive drone detection interface presents real-time situational awareness in a clear and operator-friendly layout. On the right-hand side, a dynamic list displays key information for each detected drone, including its current altitude, flight speed, precise latitude and longitude coordinates, and a unique SN (serial number) for reliable identification. This structured presentation allows operators to quickly assess multiple targets at a glance, distinguish individual drones, and make timely, informed decisions during monitoring and response operations.
