Nylon Sae Flywheel Coupling for Combustion Engines

The involue-crowned teeth structure is exclusively designed for the angular deviation to avoid the angular force on the pump shaft and seal. Also, it is beneficial to compensate for the radial-angular assembly error, further avoiding extra loads.

The coupling sleeve is made of damping material which could decrease the vibration during transmission. The maximum axial gap is ±2mm, so it could absorb shaft movement and avoid the axial force that occurred from the axial.

Strengthen the match of the coupling sleeve and metal hubs; no maintenance and lubrication is needed.

It is easy to assemble with high mechanical strength, heat endurance, and insulation capability. The whole set coupling assembly usually fasten to the housing, and only one pump connecting plate is required. The reduced space could save the mounting bracket metal plate or hydraulic system from reaching the minimum gap. It is used to connect the internal combustion engine and hydraulic pump. Special-made flywheel nylon plates are available.

Technical Specifications

We are an OEM manufacturer. So we can replace the Centa flex coupling completely whole set, and we will create a drawing for you and guarantee long service life. You need to provide us below:

1. Description of the equipment[For example:Excavator(8 ton) JR978,Road machinery JR934,Mining machinery(90 ton) JR989,Agricultural machinery JR990,Marine machinery JR901...]

2. Brand, model (For example, CUMMINS 6BTAA5.9-C160...)Maximum output torque and Maximum output speed(For example:580NM,2200RPM...)Drawing of flywheel, Drawing of flywheel housing...If there is a connection board between the flywheel housing and the pump, please attach the drawings of the pump connection board

Chinese OEM manufacturer Reijay replaces Bowex FL-PA nylon flanges for combustion engines and Centaflex coupling. If you have another question, please feel free to contact us.