The Pneumatic 200 Drilling Machine is powered by compressed air, with a lightweight structure, simple operation, and strong power. It is mainly used for drilling blasting holes, anchor holes, and grouting holes in mining, tunnel, slope and other engineering projects. Suitable for hard rock formations and non electric, explosion-proof field conditions, reliable, durable, and easy to maintain.
| Parameter | Value |
|---|---|
| Product Type | Crawler Mounted Drilling Rig |
| Drilling Hole Diameter | 105-300 mm |
| Drill pipe diameter | 76mm |
| Footage efficiency | 10-35m/h |
| Walking speed | 2.5km/h |
| Drilling Rod Length | 3 m |
| Weight | 5.5 T |
| Rotary Torque | 5900 |
| Material | Rubber Track |
| Walking speed | 2.5km/h |
| Lifting Force | 18T |
| Maximum Rotational Speed | 30/120r/min |
| Overall Dimensions | 3.8m*1.8m*2.3m |
| Engine | Xidong:65KW |
The pneumatic 200 drilling rig uses compressed air as its power source, and high-pressure gas drives the piston to move back and forth at high frequencies, impacting the drill rod and bit to break rocks. At the same time, compressed air is blown out of the bottom of the hole through the drill rod, and the rock slag is discharged outside the hole, achieving synchronous impact drilling and slag discharge.