The tracked water well drilling rig relies on the all terrain passability of the tracked chassis, which can easily cross complex sites such as mountains, farmland, and mud without the need for additional traction, greatly reducing the site limitations of field operations; The body is equipped with a high-power drilling system (mostly hydraulic or pneumatic drive), which can adapt to different rock layers (such as soil layers, sand layers, and hard rocks), supporting drilling depths from tens to hundreds of meters in water wells. The ground contact area of the track is large, and the stability of the body during drilling is strong, which can ensure the integrity of the hole wall and the quality of well completion. The equipment is relatively easy to operate, and some models integrate automated drilling functions, which can reduce manpower input. At the same time, it has durable and anti construction characteristics, suitable for long-term outdoor well construction, and is the core equipment to solve the water and irrigation needs in remote areas, rural areas, and outdoor work sites.

• Equipped with a self-propelled function, it does not require disassembly and transportation, and can quickly transfer between multiple well positions (usually at a speed of 3-5 km/h), especially suitable for multi well construction in contiguous farmland or villages, saving more than 50% of transfer time compared to traditional split type drilling rigs.
• The operating threshold is relatively low, and some models integrate semi-automatic drilling systems (such as automatic feeding and parameter monitoring), which can be completed by 1-2 people, reducing manpower investment; At the same time, the track structure is wear-resistant and has a low failure rate. The maintenance cost for long-term outdoor operations is 20% -30% lower than that of wheeled drilling rigs.

• Thoroughly clean: Rinse off the dirt and oil stains on the machine body, wipe dry, and apply rust proof oil on the surface of the track shoes, drill frame, and oil cylinder piston rod;
• Oil protection: Change the engine oil and hydraulic oil (if approaching the replacement cycle), start the engine and hydraulic system and run them for 10 minutes (let the new oil fill the pipeline), then close and release the accumulated water in the fuel tank;
• Component protection: Disassemble the drill bit and drill rod, store them separately in a dry room (drill rod thread cover protective cap), use wooden blocks to cushion the tracks (to avoid direct contact with the ground and moisture), and place desiccants inside the electrical box.

Front view of ST-200 drilling rig

Side view of ST-200 drilling rig

Operational view of drilling rig

Track detail of drilling rig

Drilling mechanism close-up