High Stability BW Series 160 Mud Pump For Water Well Drilling Rigs With OEM Wheels

Product Description

Product Specifications

Product Main Advantages

1. Compact structure, light weight, small size, beautiful appearance, can be driven by hydraulic motor, motor and diesel engine;

2. In the design, we should adopt new concepts, new structures, new materials and new processes;

3. Improve the standardization, serialization and generalization of the horizontal pump body, crankshaft, connecting rod, crosshead, pump head and some other related parts as far as possible, and reduce the types of other parts;

4. The wearing parts have long service life and high reliability.

6. Electricity, Diesel Driven or Unpowered Machine Optional.

7. Stable Output, High Pressure and Great Grout Injection Performance.

8. High Quality and Compact Structure, Easy to Install, Operate, Move and Maintain.

BW Series Mud Pump Working Attentions

1. Before starting, the suction pipe, bottom valve and pump body should be filled with water, and the upper end of the pressure gauge buffer should be filled with oil.

2. Before starting, make the piston reciprocate twice, and start with no load when there is no obstruction. After starting, the load shall be increased gradually after the operation is normal.

3. During operation, the sand content of mud should be tested frequently. The sand content of mud shall not exceed 10%.

6. For mud pump with multiple speeds, several speeds shall be operated separately in each shift, and the operation time shall not be less than 30min

4. Do not change speed during operation; When it is necessary to change speed, stop the pump for shifting.

5. During operation, when there is abnormal noise, abnormal water volume and pressure, or obvious temperature rise, the pump shall be stopped for inspection.

6. Under normal conditions, the pump shall be stopped at no load. When the pump is stopped for a long time, all drain holes should be opened, the cylinder head should be loosened, the bottom valve drain rod should be lifted, and all the mud and sand in the pump body and pipeline should be drained.

7. In case of long-term shutdown, clean the mud and oil dirt of each part, drain the lubricating oil in the crankcase, and take anti-rust and anti-corrosion measures.

Common faults and troubleshooting methods of mud pump:

Mud pump fault 1: pump does not absorb water

Causes: insufficient water injection, inability to exhaust air from the pump, air leakage from the suction pipe, and large gap between the front liner and the impeller

Solution: Continue to inject water, check the pipeline for air leakage, and adjust the clearance between the impeller and the front liner plate

Mud pump fault 2: pump filling slowly

Cause: The gap between the front liner and the impeller is large, the water outlet pipe cannot seal the air, and the exhaust is full

Solution: Adjust the clearance, adjust the water outlet pipe, and install a vacuum pumping device

Mud pump fault 3: low outlet pressure and low flow

Cause: There is air in the pump, the gap between the impeller and the front liner is large, the clutch is not tightly closed, and the impeller or liner is worn

Solution: Empty the gas in the pump, adjust the clearance, adjust the clutch friction plate clearance, and replace the impeller or liner plate

Jinzhou Shitan Machinery Equipment Co., Ltd. Main Products：

Pneumatic Drilling Rig / Air Drilling Rig（ST-180, ST-200, ST-260, ST-300, ST-350, ST-400, ST450, ST-450, ST-500, ST-600, ST-800 and other Pneumatic water well drilling Rigs.）, Crawler Water Well Drilling Rig / Trailer Mounted Drilling Rig / Water Well Drilling Rig / Hydraulic Borewell Machine / Hard Rock Drilling Equipment / Diamond Core Drill Rig / Geological Drilling Rig / Soil Testing Drilling Rig / Portable Water Well Drilling Rig（ST-30，ST-50，XY-1A, XY-1B, XY-2, XY-2B, GK180, GK200, GY150, GY200 and 30 impact drill rig, ZLJ series tunnel drilling rig and other geological drilling machines）Crawler Track Undercarriage, Drilling Mud Pump（BW150,BW160,BW200,BW250,BW850 series Drilling mud pumps）, Drilling Air Compressor, Water Well Drill Bits（PDC Drill Bit， Tricone Bit， DTH Button Bit）, Water Well Drill Pipe, Drilling Rig Spare Parts( drilling rods , drilling rods joint , casing pipe, casing coupling, core tube, core tube coupling, lifters, automatic drop hammer, sampler, SPT tool, wrench fork, pad fork, lock joint), Track Transporter

OEM / ODM can accept. Good quality, professional after-sales service, welcome to order