Ceiling Recessed LED 3 Hours Operation Emergency Lamp With 3 Years Warranty
Product Specification
| Operation | Non-maintained |
| Input Voltage | 220V-240V 50/60Hz |
| Lamp type | 1w /3w White LED |
| Battery | Nickel-mH Battery 3.6V 1.0Ah /Ni-cad Battery 3.6V 1.8AH |
| Indicator | Red LED Indicates Charging |
| Duration Time | More than 3 hours |
| Construction | Electro-galvanized Steel Casing with Corrosion Resistant Epoxy Spray Coating; PC Plate |
| IP Rate | IP20 |
| Installation | Ceiling Recessed Mounted |
| Weight | 0.5 kg |
| Working Temperature | -10℃ to 55℃ |
| Size | 350mm×110mm×38mm Tolerance ±0.03mm |
| Customization | Battery, Duration Time, Package, Wire length |
Technical Parameters:
- Input Power: AC 220V-240V 50Hz / 60Hz
- Light source:3W high power LED
- Emergency time ≥180 minutes
- emergency conversion time ≤IS
- Emergency switching voltage: AC 144V-204V 50Hz / 60Hz
- Battery: Ni-mH 3.6V / 1600mA
- Installing hole size: Ф75mm
Operating Manual
- Disconnect the AC power during installation.
- This product should not be installed in places such as outdoors ,humid and corrosive gas and so on.
- This product should use the separate loop-powered circuit.It should not share circuit with lighting or other electrical equipment (with a switch), in order to ensure this LED emergency Ceiling light can be recharged normally.
- To ensure the product operating normally,it should be checked regularly.
- The products have been discharged before leaving the factory.So it needs to be charged 24 hours when used .
- If the product is in storage or not use for a long time, it should be charged and discharged once every three months, in order to protect the battery performance.
- Please keep this manual.
Product Show:

