Li-ion Battery Rechargeable Emergency Conversion Kit with 1-3hour Emergency Time
Product Specification
|
Operation
|
Completely Self-contained
|
|
Input Voltage
|
110V--240V 50/60Hz
|
|
Charging Current
|
200mA(Nominal)
|
|
Lamp type
|
1-45w led lamps
|
|
Battery
|
Li-ion Battery |
|
Indicator
|
Tricolor
|
|
Duration Time
|
More than 3 hours
|
|
Construction
|
Electro-Galvanized Steel Casing of High Reflectance Finished with Corrosion Resistant Epoxy Spray Coating;
|
|
Size
|
220mm×30mm×30mm
Tolerance±0.03mm
|
|
Customization
|
Battery, Duration Time, Package
|
Product Show


Notice
- The product should not be installed in outdoors, humid places or places of corrosive gas.
- A separate circuit ensures the emergency converter kit working smoothly. It should not share circuit with other lighting devices or others equipments with switches.
- Correct wiring is necessary.Warning: In permanent condition with LS, wiring should be separate with L/N. Otherwise lamp will be distoried. And wrong wiring will make the lamp not work.
- Wiring: First wiring with lamp then battery , L &N,and LS, at last power on. Warning:Wiring with L&N first then battery with lamp is forbidden.
- F355M with iron box, so wiring should connect E or G .
- When the duration time is less than the base time, please replace the battery.
- Opeartion instruction: Disconnection mains power→Uninstall the product→Unplug and take off the worn-out battery pack→Fasten the new battery pack and plug into the circuit board→Install→Connect to mains power
- Should regularly check whether the product works well.
- According to the back of F355N installation size mounting hole locations.
- In order to reach the base emergency time, pls recharge over 24 hours for first time before use.
- If the product is stored or not used for a long time, you should charge and discharge quarterly to protect the battery performance.
- Pls keep this product manual . Read each detial when use.