IP20 Ceiling Emergency Light Permanent / Non-Permanent LED Lamp High Brightness
IP20 3 Hours Operation LED Emergency Light, Permanent / Non-permanent LED Lamp
Product Specification
| Operation |
Non-maintained |
| Input Voltage |
110V-127V 50/60Hz; 220V-240V 50/60Hz |
| Charging Current |
40mA (Nominal) |
| Lamp type |
1 watt SMD White LED |
| Battery |
Ni Cd Battery 3.6V 1.0AH |
| Indicator |
Red LED Indicates Charging |
| Duration Time |
More than 3 hours |
| Construction |
Electro-galvanized Steel Casing with Corrosion Resistant Epoxy Spray Coating; PC Plate |
| IP Rate |
IP20 |
| Installation |
Ceiling Recessed Mounted |
| Weight |
0.5 kg |
| Working Temperature |
-10℃ to 60℃ |
| Size |
350mm×110mm×38mm Tolerance ±0.03mm |
| Customization |
Battery, Duration Time, Package, Wire length |
Technical Parameters
- Input Power: AC 220V-240V 50Hz / 60Hz
- Light source: 3W high power LED
- Emergency time ≥180 minutes
- Emergency conversion time ≤1S
- Emergency switching voltage: AC 144V-204V 50Hz / 60Hz
- Battery: Ni-MH 3.6V / 1600mA
- Installing hole size: Ф75mm
Operating Manual
- Disconnect the AC power during installation.
- This product should not be installed in places such as outdoors, humid and corrosive gas environments.
- This product should use a separate loop-powered circuit. It should not share circuit with lighting or other electrical equipment (with a switch), to ensure this LED emergency ceiling light can be recharged normally.
- To ensure the product operates normally, it should be checked regularly.
- The products have been discharged before leaving the factory. So it needs to be charged 24 hours when used.
- If the product is in storage or not used for a long time, it should be charged and discharged once every three months to protect the battery performance.
- Please keep this manual.
Product Show