High Quality Single Girder Gantry Crane for Lifting Scrap

Producttion Description

Single gantry cranes only have a leg on one side and a leg on the other side running on the workshop or trestle bridge. In order to expand the scope of crane operation, the main girder can extend to one side or both sides to extend the leg to form a cantilever. It is used together with CD, MD and other models of electric hoist. The hoist runs on i-beam and the crane is a small and medium-sized crane. The crane consists of the door frame (girder, leg and the lower beam, etc.), electric hoist, crane operation mechanism and electric control parts. The hoisting, transverse and longitudinal movement all have limited switch protection or buffer device, and is equipped with windproof clamp rail safety device. Working class is A3, there are two operating types , ground control and cabin control. If there are special requirements for weight lifting and other parameters, we can customize them according to the user's needs.

High Quality Single Girder Gantry Crane for Lifting Scrap Drawings

High Quality Single Girder Gantry Crane for Lifting Scrap Parameters

High Quality Single Girder Gantry Crane for Lifting Scrap Features

1. The electric hoist is hoisting mechanism;
2. The gantry girder is box-shape structure.
3. Light trussed frame and strong in wind resistance.
4. Lght dead weight, simple structure and easy installation and maintenance,
5. Three operation modes:

• Ground pendant with press button,
• Wireless remote control
• Cabin control

High Quality Single Girder Gantry Crane for Lifting Scrap Safety Features

1. Crane traveling limit switch
2. Weight overload protection device
3. Lifting height limit device
4. Voltage lower protection function
5. Phase sequence protection function
6. Warning indicator: flashing lights and warning sound.
7. Emergency stop function
8. Rain cover for outside hoist, driving units, electrical cubicle.
9. Wireless infra-detector for anti-collusion​

If you want to order this single beam gantry crane, Pls tell me the details as follows

1. The Max. lifting capacity? (Ton)
2. The span of gantry crane?(the distance of rail to rail center)
3. Do you need cantilevers at two beam ends? if it is, Pls mention the length per side.
4.The Max. lifting height of hook? (or total height of crane)
5. What type meterial will you to lift?
6. The power source standard?(380V, 50Hz, 3phase or others)

Our Services