Banner Q4X series laser ranging photoelectric sensor Q4xTBLAF300-Q8 photoelectric switch sensor

Product description

Rugged, multi-functional laser ranging sensors are capable of detecting submillimeter range changes with exceptional performance.

• Switching quantity, analog quantity (0-10V or 4-20 mA), transparent object detection, available in 10-Link model
• Q4X600 high-resolution models can now provide analog output and higher excess gain to solve more application problems
• Reliable detection range up to 25 mm and as far as 610 mm
• Detects a variety of target colors, materials, and surfaces based on distance
• Dual teaching mode (intensity + distance) is ideal for error prevention applications, enabling transparent object detection without reflector plates
• Rugged FDA-grade stainless steel case with IP69K protection rating
• Easy Settings with response buttons
• Rugged design, resistant to mechanical shock, overtightness and extreme vibration
• The tilting four-digit display provides clear range reading

specification

Features

Display and Indicators The display is a 4-digit, 7-segment LED. The main screen is the Run mode screen. For 2-pt, BGS, FGS, and DYN TEACH modes, the display shows the current distance to the target in millimeters. For dual TEACH mode, the display shows the percentage matched to the taught reference surface. A display value of indicates the sensor has not been taught.

Output Indicator
• On—Outputs conducting (closed)
• Off—Outputs not conducting (open)
Stability Indicator (STB)
• On—Stable signal within the specified sensing range
• Flashing—Marginal signal, the target is outside the limits of the specified sensing range, or a multiple peak condition exists
• Off—No target detected within the specified sensing range
Output Indicator
• On—Outputs conducting (closed)
• Off—Outputs not conducting (open) Stability Indicator (STB)
• On—Stable signal within the specified sensing range
• Flashing—Marginal signal, the target is outside the limits of the specified sensing range, or a multiple peak condition exists
• Off—No target detected within the specified sensing range

Buttons

(SELECT)(TEACH)
• Press to select menu items in Setup mode
• Press and hold for longer than 2 seconds to start the currently selected TEACH mode (the default is twopoint TEACH)
(-)(MODE)
• Press to navigate the sensor menu in Setup mode
• Press to change setting values; press and hold to decrease numeric values
• Press and hold for longer than 2 seconds to enter Setup mode
(+)(DISP)
• Press to navigate the sensor menu in Setup mode
• Press to change setting values; press and hold to increase numeric values
• Press and hold for longer than 2 seconds to switch
ote: When navigating the menu, the menu items loop.