WESPC Original Mebay DC40D MK3 Generator Controller Generator LCD Unit Control Module Generator Control Panel
Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop,Parameters monitoring, faults-checking as well as data setting.
The controller has a 3 inch large screen point array LCD screen, can display various faults in the same time that the genset will be stopped once it can not work smoothly.
There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by USB and RS485 to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
Features
There are four Models under DC4xD MK3 series.
DC40D MK3: used for single machine automation. Start/Stop through remote start signal.
DC42D MK3:Based on DC40D, it adds Mains monitoring and AMF (Mains/Generator automatic switching control ) , especially suitable for the automation system composed by mains and genset.
DC40DR MK3:Based on DC40D, it adds RS485 communication port.
DC42DR MK3:Based on DC42D, it adds RS485 communication port.
DC42DR-ABF MK3:Based on DC42DR, it adds ABF backup battery pack measurement and control function.
Specification
| Options | Parameters |
| Working voltage | DC8V~36V Continuous |
| Power consumption | Standby:24V:MAX 1W |
| Working:24V:MAX 5W | |
| AC Voltage Input | 1P2W 50VAC-276VAC(ph-N) |
| 2P3W 50VAC-276VAC(ph-N) | |
| 3P4W 50VAC-276VAC(ph-N) | |
| Rotate speed sensor Frequency | 50-9000Hz |
| MAX Accumulating Time | 99999.9Hours(Min Store time:6min) |
| Fuel Relay Output | 5Amp DC+VE Supply voltage |
| Start Relay Output | 5Amp DC+VE Supply voltage |
| Programmable Relay output 1 | 5Amp DC+VE Supply voltage |
| Programmable Relay output 2 | 5AMP Non-contact-Normal open--Normal close output |
| Programmable Relay output 3 | 5AMP Non-contact Normal Open output |
| Programmable Relay output 4 | 5AMP Non-contact normal open output |
| Excitation output | Max 1AMP DC+VE supply voltage |
| Switch value input | Available if connecting with Battery - |
| Working condition | -25-65℃ |
| Storage condition | -40-85℃ |
| Protection Level | IP65:when waterproof rubber gasket is added between controller and its panel |
| Overall dimension | 189mm×134mm×50mm |
| Panel cutout | 160mm×120mm |
| Weight | 0.68Kg |
