Product Overview

The CDB01.1C-ET-EN1-EN1-EN2-EN2-NN-S-NN-FW is a configurable dual-axis control section of the Rexroth IndraDrive CDB family. It is designed to seat inside the power unit and act as the motion-control brain for two servo axes. This unit ships with Multi-Ethernet (ET) master communication, a fixed encoder-interface layout (EN1 / EN1 / EN2 / EN2), no onboard safety option (NN), standard control panel (S), and firmware ordered separately (FW).

Built for CNC machines, automated production lines, and industrial motion cabinets where the original Rexroth CDB configuration must be reproduced exactly—not approximated by series name alone.

Key Features

• Exact type-code match – ET / EN1×2 / EN2×2 / NN / S / NN / FW positions are decoded before shipment to prevent cross-series mis-replacement.
• Dual-axis independent control – runs two IndraDrive servo axes with synchronized position / speed / torque loops; PWM switching 2–16 kHz; current-loop cycle 62.5–125 µs.
• Multi-Ethernet communication (ET) – supports EtherCAT / PROFINET / Ethernet/IP depending on firmware; not field-upgradable to Sercos or PROFIBUS by software alone.
• Encoder interface layout:
  • Option 1 (EN1) → HSF / RSF incremental
  • Option 2 (EN1) → HSF / RSF incremental
  • Option 3 (EN2) → EnDat 2.1 / 1 Vpp / TTL
  • Option 4 (EN2) → EnDat 2.1 / 1 Vpp / TTL
  Positions 3–4 are critical: swapping EN1 / EN2 slots changes feedback compatibility.
• No onboard safety module (NN) – standard drive behavior; Safe Torque Off / Safe Motion must come from a higher-level PLC or separate safety card.
• Standard control panel (S) + RS232 service port + MMC card slot for parameter backup.
• Firmware sold separately (FW) – unit is hardware-only; matching firmware version must be confirmed against the existing drive project before commissioning.

Technical Specifications

Replacement & Compatibility Warning

Related Model Variants

• CDB01.1C-ET-ENS-ENS-NNN-NNN-S2-S-NN-FW – multi-encoder single-axis variant with S2 panel
• CDB01.1C-SE-EN2-EN2-EN2-EN2-L2-S-NN-FW – Sercos communication, four EN2 slots, L2 safety, S panel

Typical Applications

• CNC machining centers & turning centers
• Packaging, printing, textile, and food-processing automation
• Robot cells and gantry / transfer-line servo cabinets
• Factory MRO emergency replacement and panel rebuilds

About the Supplier – DF Automatic

DF Automatic supplies Rexroth CDB / CSB / CSH control sections, IndraDrive components, servo drives, controllers, and obsolete industrial automation spares to global repair buyers, CNC service teams, and maintenance departments. Each control section is type-code verified, functionally checked where agreed, and packed for export shipment.