The B&R 5PC600.SX02-01 is a two-slot Automation PC 620 system unit for industrial machine-control and visualization applications. It provides two half-size PCI positions, one slide-in drive slot and the standard serial, USB, Ethernet and display interfaces of the APC620 platform.
The system unit requires a compatible CPU board, main-memory module, heat sink and storage device. These components determine the final processor performance, RAM capacity, operating temperature and application capability.
| Complete Model | 5PC600.SX02-01 |
| Series | Automation PC 620 |
| PCI Slots | 2 half-size, 32-bit, PCI 2.2, 33 MHz |
| Processor | Compatible APC620 CPU board required |
| Main Memory | SO-DIMM DDR2; capacity depends on installed module |
| Slide-In Drives | 1 |
| Serial Interfaces | 2 * RS232 |
| USB | 2 * USB 2.0 |
| Ethernet | 2 * 10/100 Mbit/s |
| Display Interface | Smart Display Link / DVI-I |
| Nominal Supply | 24 VDC ±25% |
| Nominal Current | 3.8 A |
| Protection Class | IP20 |
| Approximate Dimensions | 114.9 or 130.1 * 270 * 253 mm, depending on heat sink |
| Approximate Weight | 4.5 kg, component-dependent |
The unit is suitable for industrial visualization, machine software, data acquisition, communication-card installations and maintenance of existing APC620 systems.
Verify the full system-unit code, CPU board, DDR2 memory, PCI cards, storage device, operating system, software licenses and application backup. The terminal block must be checked separately because it is not integrated into the material-number definition.
5PC600.SX05-01 provides five PCI slots and two drive positions, while 5PC600.SX01-00 provides one PCI slot and no slide-in drive position.
Provide photographs and part numbers for the CPU board, RAM, heat sink, drive and PCI cards when requesting a complete assembled replacement.