Product Overview

The Schneider Electric LMC400CCA10000 is a PacDrive 3 LMC400 motion controller supplied in the UPS accessory-kit configuration. It combines PLC logic, synchronized motion control, machine communication and integrated digital and analog I/O in one cabinet-mounted controller.

The controller supports up to 16 coordinated servo axes through the Sercos motion network. The UPS accessory-kit configuration distinguishes LMC400CCA10000 from the basic-accessory-kit model LMC400CAA10000. The included UPS components and their condition must be confirmed before quotation.

Main Features

• Exact commercial reference: LMC400CCA10000
• PacDrive 3 LMC400 motion controller
• UPS accessory-kit configuration
• Maximum capacity of 16 synchronized servo axes
• Intel Celeron M processor operating at 1.5 GHz
• 512 MB DDR2 RAM and 128 kB NVRAM
• CompactFlash card storage for controller project and system data
• 24 VDC rated supply voltage
• Integrated Sercos, standard Ethernet and real-time Ethernet interfaces
• Integrated CAN/CANopen and Profibus DP communication
• 20 digital inputs, 4 interrupt inputs and 16 touch-probe inputs
• 16 digital outputs with two analog inputs and two analog outputs
• Master encoder, PacNet, serial and USB interfaces
• Two communication option slots
• Temperature-controlled fan cooling
• Four-line alphanumeric diagnostic display

Technical Specifications

Compatible System and Applications

The LMC400CCA10000 is intended for PacDrive 3 systems requiring up to 16 coordinated servo axes together with the UPS accessory-kit configuration. Typical applications include packaging machinery, robotic handling systems, printing and converting equipment, assembly lines and other synchronized production machines where controlled power-loss handling is required.

The UPS accessory kit may support controller operation, project protection or an orderly shutdown during a power interruption, depending on the installed machine design. The actual UPS components, wiring, energy-storage condition and shutdown sequence must be confirmed from the installed system.

Maintenance and Replacement Notes

Before replacement, verify the complete LMC400CCA10000 reference, nameplate, hardware revision, firmware, CompactFlash project and UPS accessory-kit configuration. Back up the CompactFlash card and controller project before disconnecting the unit.

Inspect the UPS energy-storage components and confirm their condition, age, wiring and compatibility. Verify the 24 VDC power system, shutdown sequence, Sercos topology, Ethernet configuration, CANopen network, Profibus DP devices, serial communication and I/O assignments.

The basic LMC400CAA10000 should not automatically be treated as a direct replacement because it does not use the same accessory-kit configuration. Also verify the connected servo drives, motor matching, brake option, encoder type, shaft configuration and complete cable set.

Do not substitute an LMC402, LMC300 or LMC600 without reviewing firmware, project compatibility, fieldbus configuration, CompactFlash data and the required UPS functions.

Related Models

LMC400CAA10000 is the corresponding LMC400 controller supplied with the basic accessory kit. Related PacDrive controller families include LMC300 and LMC600. The exact replacement must be selected according to the commercial reference, UPS requirements, firmware, CompactFlash project, communication configuration and machine architecture.

Inquiry and Supply Notes

Please provide the complete commercial reference, clear nameplate photographs, firmware information, controller-project details and photographs of the UPS accessories when requesting a quotation. Confirm whether the CompactFlash card, UPS components, connector set and other accessories must be included.

Because this is a discontinued legacy controller, the condition of the UPS components, product condition, testing status, firmware, included accessories, availability and delivery time must be confirmed before quotation.