Product Overview

IAI RCP6-SA4C-WA-35P-5-300-P3-R03 is a straight-motor slider-type linear electric actuator from the RCP6 RoboCylinder series. It combines an SA4C actuator body, 35P pulse motor, batteryless absolute encoder, 5 mm ball-screw lead and 300 mm working stroke.

The lead-5 configuration provides a balance between controlled travel speed and available thrust. It is suitable for medium-length positioning, component transfer and automated assembly operations where a repeatable guided linear axis is required.

Main Features

• SA4C straight-motor slider-type construction
• 35P pulse motor drive configuration
• Batteryless absolute encoder with 8192 pulses per revolution
• 5 mm ball-screw lead and 300 mm working stroke
• Maximum speed up to 390 mm/s under applicable high-output operating conditions
• Maximum horizontal payload up to 14 kg under applicable high-output conditions
• Standard repeat positioning accuracy of approximately ±0.01 mm
• P3 and R03 option codes retained in the exact model identity

Technical Specifications

Compatible Systems and Applications

RCP6-SA4C-WA-35P-5-300-P3-R03 can be used in automated assembly equipment, component-transfer systems, inspection stations, packaging machinery, production fixtures, loading mechanisms and other applications requiring a guided 300 mm linear axis.

The lead-5 ball screw provides more available thrust and lower maximum speed than lead-10 or lead-16 variants. Final payload and speed limits depend on installation orientation, acceleration, operating duty, controller settings and the applied mechanical moment.

Selection and Replacement Notes

Confirm the complete order code, including the SA4C body, WA encoder specification, 35P motor, 5 mm lead, 300 mm stroke and P3-R03 suffix. Similar-looking RCP6 actuators may have different cable lengths, brake arrangements, connector directions or controller requirements.

Before replacement, record the controller model, actuator parameters, mounting orientation, home-return direction, mechanical datum and cable routing. Verify that the replacement actuator provides the same stroke and does not interfere with surrounding machine components.

A lead-2.5 version may provide higher thrust but lower speed, while lead-10 and lead-16 versions provide greater speed with different payload characteristics. These versions are not automatically interchangeable without parameter and application review.

Check the R03 option directly against the original actuator nameplate and ordering documentation. The project source does not provide enough information to expand this option code into a guaranteed cable or connector specification.

Inquiry and Supply Notes

Please provide photographs of the complete actuator nameplate, controller label, motor and encoder connectors and mounting arrangement when requesting a quotation. Product condition, included cables, option details, warranty and delivery time should be confirmed before purchase.