MachineU > China Products
DY-M587 SILICONE GASKET MAKER (NEUTRAL)
DY-M587 SILICONE GASKET MAKER (NEUTRAL)
Specifications
Initial Cure Time :
10-20 minutes
Package :
85g/tube; 12tubes/small box;144tubes/big box
Size :
44x44x38 (cm)
Shelf Life :
12 months
Description
1. Properties & Applications
High temperature silicone sealant is developed by advanced technique. It is of one component, good sealing, resistance to high temperature and oil, weatherability, no flowing with vertical operation, no corrosion, low odor. It can replace a variety of rubber pads, asbestos mat, cork pad and paper pad to prevent leakage of water, oil, gas.
High temperature silicone sealant is applicable to automobiles, motorcycles, marine engines, gear boxes, fuel tank, construction machinery, chemical equipment, pipeline pumps, instrumentation, electronics industry, electrical devices, and also to flat flanges, pipe joints, sealing cover joints in other mechanical equipment.
 
2. Directions
  • Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
    Pierce the nozzle with the cap. Coat the gasket from the outer edge to inner edge at about 1.6 -3.2 mm thickness.
  • The surface of adhesive film will create reaction in about 10-20 minutes. Then press and tighten the two sealing sides.
  • It’ll take 24 hours to reach its maximum strength at room temperature 25℃.
  • Re-cap the tube after use. Wash your hands with water, and clean tools.
 
3. Storage & Warnings
 Storage:
  • Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
  • Store the adhesive at room temperature.
  • Keep away from any source of ignition.  
 Warnings:
  • In the event of mass use, make a pre-test.
  • The adhesive is irritable to skin and eyes. 
  • Wear gloves while applying glue.
  • Keep out of reach of children.
  • In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
 
4. Parameters

Color 

Elongation (%)

Filling Gap

Heat Resistance

Blue paste

300

6mm

-60℃～+320℃

Touch dry 

Full cure

Shelf life﹙25℃﹚

Compressive Resistance 

15mins～20mins

24hrs

12 months

10MPa

 

DY-M587 SILICONE GASKET MAKER (NEUTRAL)　　DY-M587 SILICONE GASKET MAKER (NEUTRAL)

 

DY-M587 SILICONE GASKET MAKER (NEUTRAL)　　DY-M587 SILICONE GASKET MAKER (NEUTRAL)

Send your message to this supplier
Send Now

DY-M587 SILICONE GASKET MAKER (NEUTRAL)

Ask Latest Price
Product Detail
Initial Cure Time :
10-20 minutes
Package :
85g/tube; 12tubes/small box;144tubes/big box
Size :
44x44x38 (cm)
Shelf Life :
12 months
Contact Supplier
DY-M587 SILICONE GASKET MAKER (NEUTRAL)

Hunan Baxiongdi New Material Co., Ltd.

Verified Supplier
2 Years
hunan, changsha
Since 1999
Business Type :
Manufacturer
Main Products :
Epoxy AB Glue, Modified Acrylic Adhesive, No More Nails Glue
Total Annual :
500-1000
Employee Number :
100~500
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Gasket Maker
MachineU China Products
Contact Supplier
Submit Requirement