DEYI-E705 3hours 5kg High Temperature Resistance Structural Adhesive Epoxy Adhesive
Properties
4-MIN EPOXY ADHESIVE is a high-performance structural adhesive for both household and industrial applications. It provides superior bond strength for repairs and welds across various materials.
- Bonds to metal, plastic, rubber, wood, ceramics, glass, and concrete
- Resistant to acid, alkali, and oil
- Non-flammable, non-shrinking, and waterproof
- Creates metallic grey finish
- Can be filed, ground, and drilled after curing
Applications
This epoxy adhesive is ideal for bonding and repairing in various industries including machinery, electronics, automobiles, shipbuilding, chemical industry, and handicrafts. It forms excellent bonds between metals, rubbers, leathers, and various plastics.
Directions
- Clean substrate surface thoroughly to remove water, dust, and oil
- Remove cap and puncture tubes
- Mix parts A and B at 1:1 ratio until uniform color is achieved (use within 20 minutes)
- Apply thin coat to both surfaces
- No clamping required - slight pressure during setting is sufficient
- Note: Below 5℃ will extend curing time
Storage & Warnings
Storage:
- Store in shady, dry, well-ventilated area
- Maintain at room temperature
- Keep away from ignition sources
Warnings:
- May irritate skin and eyes
- Keep out of reach of children
- In case of contact, flush with water and seek medical attention if needed
Technical Specifications
| Color |
Cured Color |
Viscosity (CPS/25℃) |
Mixing Ratio |
Work Time (25℃/100g) |
Cure Time (25℃/100g) |
Lap Shear Strength (St-St) |
Heat Resistance (℃) |
Shelf Life (25℃) |
| A:black |
Light Black |
A:>100000 |
1:1 |
5 Minutes |
Touch Dry: 5-10 Mins |
≥16 MPa |
-60 to +100 |
12 months |
| B:milky white |
|
B:>100000 |
Full cure: 12 hrs |