Hunan Baxiongdi New Material Co., Ltd. was established in 1999. 25 years professional manufacture experience, we become one of the largest manufacture on adhesive in Changsha city Hunan China.

Our main products are including RTV silicone gasket maker, liquid nails adhesive, threadlocker sealant, modified acrylic adhesive, epoxy adhesive and 502 super glue. They are well approved by SGS, ROSH, ISO9001. OEM are welcomed.

We’d like to cooperate with customers from all over the world based on mutual-benefit. We always put “Customers First” in our mind and commit ourselves to providing high quality service to all reliable and esteemed international partners and clients.

Application

Widely used in the fields of electronics, appliances, air conditioning, lighting, electromechanical, mechanical equipment, etc., suitable for bonding and sealing products such as microwave ovens, induction cookers, ovens, water heaters, range hoods, etc.

Excellent adhesion and sealing effect on materials such as PVC, ABS, metal, ceramics, glass, etc.

The Color of the Product

(1) Avoid long-term skin contact with sealant. If un vulcanized sealant enters the eyes, immediately rinse with water or see a doctor.

(2) Keep out of reach of children and do not enter.

(3) Unvulcanized rubber has a slight volatile odor, please pay attention to ventilation when using.

(4) Unused glue must be strictly sealed, stored in a cool, ventilated, and dry place.

(5) After the first use, a small amount of sealant should be squeezed out to allow the sealant to solidify on the threads of the cap and nozzle, making it convenient for the next use.

How to use it.

1. Clean the surface of the working parts, clean the surface of the objects that need to be bonded or coated, and remove rust, dust, oil stains, etc. from the surface of the working parts.

2. Apply glue, cut open the cap of the glue tube, install the glue nozzle, and use the glue tool to apply glue.

3. Squeeze the colloid and evenly distribute it on the surface of the object being bonded or coated. Place it at room temperature and allow the colloid to absorb trace amounts of water vapor in the air before solidifying. Generally, it can be cured after being left for 24 hours. If the bonding area is large and the adhesive layer is thick, it needs to be left for about 72 hours to cure.