4.3-tonne buoyancy, 400 kg payload and dedicated internal equipment space
2000 mm Diameter | 4.3 t Buoyancy | 400 kg Payload | 2.53 m Platform Height | 2 * 100 Ah Battery Provision
A navigation buoy carrying multiple onboard devices needs enough flotation capacity after the final equipment is installed.
With 4.3 tonnes of total buoyancy and up to 400 kg maximum payload, the DX-ST2000 provides practical capacity for navigation, power and monitoring equipment within the final project configuration.
The DX-ST2000 provides a 2.53 m platform height from the baseline and a 4.98 m overall height, creating an elevated position for upper AtoN equipment.
This makes the buoy suitable for projects where navigation and signal equipment requires a clearly defined mounting height above the main float body.
The DX-ST2000 is intended for projects where the buoy must support more than the basic navigation mark itself.
Its combination of buoyancy capacity, equipment payload, elevated mounting position and internal power space provides a practical base for project-specific AtoN configurations.
An internal compartment of Ø0.7 m * H1.4 m provides dedicated space for onboard components.
The current configuration can accommodate up to 2 * 100 Ah lithium batteries, allowing the power system to be considered as part of the buoy layout from the start of the project.
| (1)IALA Top Mark | (2)Navigation Lantern | (3)Communication Antenna |
| (4)Upper Equipment Platform | (5)Solar Panel | (6)Solar Panel |
| (7)Lifting & Mooring Eye | (8)Float Body | (9)Tail Tube |
The DX-ST2000 is suitable for:
| Choose DX-ST2000 When You Need |
|---|
| 4.3 t flotation capacity for an equipment-based AtoN configuration |
| Up to 400 kg of installed equipment capacity |
| A 2.53 m elevated equipment platform |
| Dedicated Ø0.7 * H1.4 m internal equipment space |
| Provision for two 100 Ah lithium batteries |
The internal arrangement provides space for up to 2 * 100 Ah lithium batteries.
Yes. The upper structure can be configured for solar panels, marine lanterns, S-band or X-band RACON and other project-specific AtoN equipment.
The float structure uses CCS Grade B marine steel plate, with 316L stainless steel used for specified internal components.