MachineU > China Products > Chemicals > Inorganic Chemicals > Oxide
Pre - shaded Machining Zirconium 98×12 mm Super Translucent with VITA 16 Colors
Pre - shaded Machining Zirconium 98×12 mm Super Translucent with VITA 16 Colors
Specifications
Brand Name :
UPCERA
Model Number :
ST-Color
Certification :
CE、 FDA 、CFDA、KFDA
Place of Origin :
China
Price :
Negotiation
Payment Terms :
T/T
Supply Ability :
10 working days after received your payment
Packaging Details :
Carton
Density before sintering (g/cm3) :
3.1±0.5 g/cm3
Density after sintering (g/cm3) :
6.08±0.01 g/cm3
CTE after sintering (25-200℃) :
(10.5±1.0)x10-6K-1
3-point bending strength after sintering (MPa) :
1100Mpa
Average transmittance :
25~39%
Chemical solubility after sintering (μg/cm2) :
< 100
Radioactivity after sintering (Bq/g) :
<0.1
Sintering temperature (℃) :
1450-1550℃Recommended 1530℃
Description

Pre - shaded Machining Zirconium 98×12 mm Super Translucent with VITA 16 Colors

Specification

Wieland System

Cerac in lab (Sirona)System

Amann Girrbach System

Zirkon zahn System CAD/CAM

Upcera Open System

D98*10

14*13*13

89*71*10

D95*10

D100*10

D98*12

20*14*15

89*71*12

D95*12

D100*12

D98*14

20*19*15

89*71*14

D95*14

D100*14

D98*16

40*14*15

89*71*16

D95*16

D100*16

D98*18

40*19*15

89*71*18

D95*18

D100*18

D98*20

55*19*15.5

89*71*20

D95*20

D100*20

D98*22

65*25*22

89*71*22

D95*22

D100*22

D98*25

65*40*22

89*71*25

D95*25

D100*25

　

85*40*22

　

　

　

FAQ

Q : Is the fit of crowns and bridges based on zirconia copings as good as that of PFM crowns and bridges?

A : Yes, the marginal fit of crowns and bridges fabricated from zirconia copings can be as good or better than PFM crowns and bridges.

Q : Is the fit of a zirconia coping important since the zirconia ceramic is so strong?

A: The thicker the cement the weaker the all-ceramic restoration. Cements are not as rigid as zirconia ceramic, so a thicker cement layer will cause more flexural deformation of a ceramic core, increasing the potential for fracture.

Q : Is it ok to grind on a zirconia coping without water spray?

A: Water spray is necessary when grinding on a zirconia ceramic coping. The white light or hot spot you see between a diamond and a zirconia ceramic has been measured at 1500 ºC. If the temperature of zirconia ceramic rises above 1000 ºC, a phase change can occur that will induce cracking and surface defects, lowering the strength of the coping.

Product tags

aluminium ral color anodizing

,

the mosaic polishing machine

,

mosaic polishing machine
Send your message to this supplier
Send Now

Pre - shaded Machining Zirconium 98×12 mm Super Translucent with VITA 16 Colors

Ask Latest Price
Product Detail
Brand Name :
UPCERA
Model Number :
ST-Color
Certification :
CE、 FDA 、CFDA、KFDA
Place of Origin :
China
Price :
Negotiation
Payment Terms :
T/T
Contact Supplier
Pre - shaded Machining Zirconium 98×12 mm Super Translucent with VITA 16 Colors

Shenzhen Upcera Dental Technology Co., Ltd.

Active Member
10 Years
guangdong, shenzhen
Since 2014
Business Type :
Manufacturer, Seller
Main Products :
Dental Zirconia Blank, Dental Zirconia Blocks, High Translucent Zirconia
Total Annual :
1000000-10000000
Employee Number :
800~1000
Certification Level :
Active Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Zirconium Oxide Ceramic
MachineU China Products Chemicals Inorganic Chemicals Oxide
Contact Supplier
Submit Requirement